# CMAQv5.0-adjoint model

**URL:** <https://forum.cmascenter.org/t/cmaqv5-0-adjoint-model/3521>\
**Category:** CMAQ-Adjoint\
**Created:** [August 24, 2022, 8:24am UTC](https://forum.cmascenter.org/t/cmaqv5-0-adjoint-model/3521 "2022-08-24T08:24:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![H.H](https://avatars.discourse-cdn.com/v4/letter/h/a183cd/32.png) [@H.H](https://forum.cmascenter.org/u/H.H)\
**Post date:** [August 24, 2022, 8:24am UTC](https://forum.cmascenter.org/t/cmaqv5-0-adjoint-model/3521/1 "2022-08-24T08:24:13Z")

</div>

Hello,  
I followed the instructions in the CMAQ v5.0 Adjoint User’s Manual. ([https://doi.org/10.5194/gmd-13-2925-2020-supplement.](https://doi.org/10.5194/gmd-13-2925-2020-supplement.))

After executing the command (ssh://git@adjoint.colorado.edu/yanko.davila/cmaq\_adj.git ), it asks for a password (as shown below)

 ![！](https://canada1.discourse-cdn.com/flex027/uploads/cmas/original/2X/2/2e9618c7d5d7523568dcc18629d82d341bbe9920.jpeg)

Does anyone else have the same problem? May I ask how to solve this problem?

Best regards,  
Helen

---

<div class="post-metadata">

**Author:** ![zhaoshunliu](https://avatars.discourse-cdn.com/v4/letter/z/5e9695/32.png) [@zhaoshunliu](https://forum.cmascenter.org/u/zhaoshunliu)\
**Post date:** [August 30, 2022, 4:16pm UTC](https://forum.cmascenter.org/t/cmaqv5-0-adjoint-model/3521/2 "2022-08-30T16:16:03Z")

</div>

Hi Helen,

The GIT repository you mentioned is private (a mistake in the manual). The adjoint code is currently available here: [http://doi.org/10.5281/zenodo.3780216](http://doi.org/10.5281/zenodo.3780216)

Sorry for the confusion.

Best regards,  
Shunliu

---

<div class="post-metadata">

**Author:** ![H.H](https://avatars.discourse-cdn.com/v4/letter/h/a183cd/32.png) [@H.H](https://forum.cmascenter.org/u/H.H)\
**Post date:** [August 31, 2022, 11:52am UTC](https://forum.cmascenter.org/t/cmaqv5-0-adjoint-model/3521/3 "2022-08-31T11:52:06Z")

</div>

Thanks a lot for your reply.
