# Issues encountered during evaluating ADJOINT model

**URL:** <https://forum.cmascenter.org/t/issues-encountered-during-evaluating-adjoint-model/4187>\
**Category:** CMAQ-Adjoint\
**Created:** [June 21, 2023, 6:12am UTC](https://forum.cmascenter.org/t/issues-encountered-during-evaluating-adjoint-model/4187 "2023-06-21T06:12:45Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hake](https://avatars.discourse-cdn.com/v4/letter/h/67e7ee/32.png) [@Hake](https://forum.cmascenter.org/u/Hake)\
**Post date:** [June 21, 2023, 6:12am UTC](https://forum.cmascenter.org/t/issues-encountered-during-evaluating-adjoint-model/4187/1 "2023-06-21T06:12:45Z")

</div>

I computed the sensitivity of NO2 using both BF and adjoint modes separately, and the results are shown in the following figure.

 ![Snipaste_2023-06-21_14-08-50](https://canada1.discourse-cdn.com/flex027/uploads/cmas/original/2X/7/79f66398bd61436c42d9269dcdd76307a4d360fd.png)

According to the comparison results, an error occurred in the adjoint mode outcome. How can I resolve this issue?

The methods I used to calculate BF and adjoint sensitivity are illustrated in the following figure.

BF:  
S\_BF=(C^(+10%)-C)/(10%)

Adjoint:  
φ(E\_No2 )=(∂Jc)/(∂E\_No2)×E\_No2

Thanks  
Hake
