# Make file created but errors exist after created file is made **URL:** \ **Category:** CMAQ-PREP\ **Created:** [July 26, 2019, 4:33pm UTC](https://forum.cmascenter.org/t/make-file-created-but-errors-exist-after-created-file-is-made/846 "2019-07-26T16:33:48Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![science\_person](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@science\_person](https://forum.cmascenter.org/u/science_person)\ **Post date:** [July 26, 2019, 4:33pm UTC](https://forum.cmascenter.org/t/make-file-created-but-errors-exist-after-created-file-is-made/846/1 "2019-07-26T16:33:48Z")
Hi All, I just made an adjustment and my compilation of icon is working well. Although, I’m still getting an error (even though my makefile was created). Should I ignore this error? My output is below: file,nfields-1 setup\_logdev.F 2 modName,modFile 2 UTILIO\_DEFN UTILIO\_DEFN.F file,nfields-1 subhdomain.F 2 modName,modFile 2 UTILIO\_DEFN UTILIO\_DEFN.F file,nfields-1 prof\_driver.F 4 modName,modFile 2 UTILIO\_DEFN UTILIO\_DEFN.F modName,modFile 3 CGRID\_SPCS CGRID\_SPCS.F modName,modFile 4 IC\_PARMS IC\_PARMS.F file,nfields-1 prof\_icout.F 5 modName,modFile 2 HGRD\_DEFN HGRD\_DEFN.F modName,modFile 3 VGRD\_DEFN VGRD\_DEFN.F modName,modFile 4 UTILIO\_DEFN UTILIO\_DEFN.F modName,modFile 5 IC\_PARMS IC\_PARMS.F file,nfields-1 prof\_vinterp.F 5 modName,modFile 2 HGRD\_DEFN HGRD\_DEFN.F modName,modFile 3 VGRD\_DEFN VGRD\_DEFN.F modName,modFile 4 UTILIO\_DEFN UTILIO\_DEFN.F modName,modFile 5 IC\_PARMS IC\_PARMS.F USE/MODULE dependencies defined Makefile generated mpif90 -c -fixed -132 -O3 -fno-alias -mp1 -fp-model source -I /u/jrwelsh/CMAQ/CMAQ\_REPO/lib/x86\_64/intel19.0.4.243/ioapi/modules -I /u/jrwelsh/CMAQ/CMAQ\_REPO/lib/x86\_64/intel19.0.4.243/ioapi/include\_files UTILIO\_DEFN.F UTILIO\_DEFN.F(71): error #7002: Error in opening the compiled module file. Check INCLUDE paths. [M3UTILIO] USE M3UTILIO, INTERPB =\> INTERP3 -------------^ UTILIO\_DEFN.F(71): error #6581: Unresolved rename. [INTERPB] USE M3UTILIO, INTERPB =\> INTERP3 -----------------------^ compilation aborted for UTILIO\_DEFN.F (code 1) make: \*\*\* [UTILIO\_DEFN.o] Error 1 **ERROR** while running make command else endif if ( 0 != 0 ) then if ( -e /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg ) then echo \>\>\> previous ICON\_v521\_profile.cfg exists, re-naming to ICON\_v521\_profile.cfg.old \<\<\< > > > previous ICON\_v521\_profile.cfg exists, re-naming to ICON\_v521\_profile.cfg.old \<\<\< > > > unalias mv > > > mv /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg.old > > > endif > > > mv ICON\_v521\_profile.cfg.bld /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg > > > exit Any and all help is greatly appreciated! Thanks! ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [July 26, 2019, 5:37pm UTC](https://forum.cmascenter.org/t/make-file-created-but-errors-exist-after-created-file-is-made/846/2 "2019-07-26T17:37:49Z")
The I/O API build should generate a _m3utilio.mod_ in the _ioapi-3.2/${BIN}_ directory. You need to include this directory in the module-search-path for your _Makefile_. How to do this depends upon what underlying compiler _mpif90_ uses (recall that it is really a script that “knows about” the MPI include-files and libraries, calling an underlying “normal” compiler like _ifort, gfortran_, or _pgif90_ that is set up at MPI install-time). For Intel and GNU compilers, the module search path is set by a command-line option “`-I<*directory*>`”; for PGI, it is “`-module <*directory*>`” (and for other copilers it is something else again. See the `MODI` _make_-variable in the appropriate I/O API _Makeinclude.${BIN}_. ---
**Author:** ![science\_person](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@science\_person](https://forum.cmascenter.org/u/science_person)\ **Post date:** [July 29, 2019, 2:21pm UTC](https://forum.cmascenter.org/t/make-file-created-but-errors-exist-after-created-file-is-made/846/3 "2019-07-29T14:21:50Z")
Thanks! I’ve been looking back at my Makefile and it seems as though the CMAQ\_LIB and other ioapi files are not in the correct path. Should I change all these to be in the current directory? Here are the libraries: set xLib\_Base = ${CMAQ\_LIB} set xLib\_1 = ioapi/modules set xLib\_2 = ioapi/include\_files set xLib\_4 = ioapi/lib Thanks for all the suggestions you’ve given me so far! It’s been very helpful! Also, here is the error message I’m getting below: Makefile generated mpif90 -c -fixed -132 -O3 -fno-alias -mp1 -fp-model source -I /u/jrwelsh/CMAQ/CMAQ\_REPO/lib/x86\_64/intel19.0.4.243/ioapi/modules -I /u/jrwelsh/CMAQ/CMAQ\_REPO/lib/x86\_64/intel19.0.4.243/ioapi/include\_files UTILIO\_DEFN.F UTILIO\_DEFN.F(71): error #7002: Error in opening the compiled module file. Check INCLUDE paths. [M3UTILIO] USE M3UTILIO, INTERPB =\> INTERP3 -------------^ UTILIO\_DEFN.F(71): error #6581: Unresolved rename. [INTERPB] USE M3UTILIO, INTERPB =\> INTERP3 -----------------------^ compilation aborted for UTILIO\_DEFN.F (code 1) make: \*\*\* [UTILIO\_DEFN.o] Error 1 **ERROR** while running make command else endif if ( 0 != 0 ) then if ( -e /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg ) then echo \>\>\> previous ICON\_v521\_profile.cfg exists, re-naming to ICON\_v521\_profile.cfg.old \<\<\< > > > previous ICON\_v521\_profile.cfg exists, re-naming to ICON\_v521\_profile.cfg.old \<\<\< > > > unalias mv > > > mv /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg.old > > > endif > > > mv ICON\_v521\_profile.cfg.bld /u/jrwelsh/CMAQ/CMAQ\_REPO/PREP/icon/scripts/BLD\_ICON\_v521\_profile\_intel19.0.4.243/ICON\_v521\_profile.cfg > > > exit Also, the compiler still isn’t generating the executable. Thanks! ---
**Author:** ![science\_person](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@science\_person](https://forum.cmascenter.org/u/science_person)\ **Post date:** [July 29, 2019, 2:35pm UTC](https://forum.cmascenter.org/t/make-file-created-but-errors-exist-after-created-file-is-made/846/4 "2019-07-29T14:35:01Z")
Also, when trying to go to the ioapi/modules file location; I’m unable to look inside the file location. Should those files “modules, include\_files, lib” all be created? Each file is marked in red as well. It seems as though it’s unable to be opened. Thanks!