# Megan 2.1 installation error **URL:** \ **Category:** MEGAN\ **Created:** [June 1, 2019, 8:10am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727 "2019-06-01T08:10:37Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 1, 2019, 8:10am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/1 "2019-06-01T08:10:37Z")
Dear @tlspero, @lizadams, @cjcoats, @bbaek I’ve been trying to install and compile MEGAN2.1 source codes but getting errors as shown below: CONST\_MEGAN.EXT:28:35: Error: Element in REAL(4) array constructor at (1) is INTEGER(4) emproc.F:652:45: ``` & NrCha,NrTyp,Canopychar, VNAME3D(s), 1 ``` Error: Symbol ‘canopychar’ at (1) has no IMPLICIT type EACO.EXT:487:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:486:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:485:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:484:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:483:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:482:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:481:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:480:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:479:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:478:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:477:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:476:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:475:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:474:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:473:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:472:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:351:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:184:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:119:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:37:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) makefile:34: recipe for target ‘emproc.o’ failed make: \*\*\* [emproc.o] Error 1 mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 checkmem.f mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 growseason.f mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 mgn2mech.F mgn2mech.F:57: Error: Can’t open included file ‘PARMS3.EXT’ makefile:29: recipe for target ‘mgn2mech.o’ failed make: \*\*\* [mgn2mech.o] Error 1 mpifort -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -c -o ioapi2uam.o ioapi2uam.f ioapi2uam.f:50: Error: Can’t open included file ‘PARMS3.EXT’ makefile:12: recipe for target ‘ioapi2uam.o’ failed make: \*\*\* [ioapi2uam.o] Error 1 Create symbolic links Kindly assist me on this. Thanks for your usual supports and helps. Catalyst ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [June 1, 2019, 1:02pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/2 "2019-06-01T13:02:07Z")
Can you kindly also quote the command-line for the compile statement that is generating these errors? It would seem to be missing a number of “-I” directives… ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 1, 2019, 2:17pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/3 "2019-06-01T14:17:24Z")
@cjcoats Below is the complete command line as requested. Thanks as you help me. Removing \*.o rm: No match. rm: No match. Make all programs mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src met2mgn.f mpifort -c -O2 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src readpar.f readpar.f:15:15: ``` parameter mx=350,my=410,mz=30 1 ``` Warning: Legacy Extension: PARAMETER without ‘()’ at (1) readpar.f:16:15: ``` parameter nlat=61,nlon=121 1 ``` Warning: Legacy Extension: PARAMETER without ‘()’ at (1) readpar.f:331:14: ``` if(.not. open3(ONAME,fsunkn3, pgname)) then 1 ``` Error: Type mismatch in argument ‘pgname’ at (1); passed REAL(4) to CHARACTER(1) makefile:31: recipe for target ‘readpar.o’ failed make: \*\*\* [readpar.o] Error 1 mpifort -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/TXT2IOAPI/INCLDIR -c -o parsline.o parsline.f mpifort -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/TXT2IOAPI/INCLDIR -c -o checkmem.o checkmem.f mpifort -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/TXT2IOAPI/INCLDIR -c -o cnvt\_efs.o cnvt\_efs.F cnvt\_efs.F:51:14: ``` INTEGER, XREF(MXTCOL) 1 ``` Error: Invalid character in name at (1) cnvt\_efs.F:151:132: ``` print*,'CID ',cid,inx,iny,xref 1 ``` Error: Function ‘xref’ requires an argument list at (1) cnvt\_efs.F:123:18: ``` XREF( S ) = 1 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:124:25: ``` VNAME( XREF(S) ) = TRIM( MESG ) 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:126:18: ``` XREF( S ) = 2 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:127:25: ``` VNAME( XREF(S) ) = TRIM( MESG ) 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:129:18: ``` XREF( S ) = 3 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:130:25: ``` VNAME( XREF(S) ) = TRIM( MESG ) 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:132:18: ``` XREF( S ) = 4 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:133:25: ``` VNAME( XREF(S) ) = TRIM( MESG ) 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:137:18: ``` XREF( S ) = N + 4 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:138:25: ``` VNAME( XREF(S) ) = 'EF_'//TRIM( MESG ) 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:143:42: ``` PRINT*,'READ VNAME:',VNAME(XREF(S)) 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type cnvt\_efs.F:157:18: ``` IBUFF(XREF(S),INX,INY) = STR2REAL( SEGMENT( 3+S ) ) ! convert char to real 1 ``` Error: Function ‘xref’ at (1) has no IMPLICIT type makefile:22: recipe for target ‘cnvt\_efs.o’ failed make: \*\*\* [cnvt\_efs.o] Error 1 mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR gamma\_etc.f EACO.EXT:487:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:486:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:485:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:484:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:483:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:482:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:481:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:480:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:479:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:478:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:477:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:476:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:475:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:474:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:473:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:472:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:351:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:184:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:119:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:37:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:487:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:486:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:485:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:484:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:483:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:482:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:481:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:480:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:479:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:478:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:477:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:476:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:475:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:474:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:473:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:472:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:351:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:184:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:119:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:37:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:487:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:486:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:485:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:484:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:483:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:482:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:481:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:480:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:479:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:478:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:477:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:476:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:475:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:474:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:473:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:472:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:351:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:184:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:119:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:37:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR checkmem.f mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR canopy.f canopy.f:168:132: ``` & NrTyp) 1 ``` Warning: Type mismatch in argument ‘cantype’ at (1); passed REAL(4) to INTEGER(4) [-Wargument-mismatch] canopy.f:172:18: ``` Trate = Stability(Canopychar, Cantype, Solar , NrCha, NrTyp) 1 ``` Warning: Type mismatch in argument ‘cantype’ at (1); passed REAL(4) to INTEGER(4) [-Wargument-mismatch] canopy.f:179:132: ``` & NrCha, NrTyp, Ws0, TairK0, HumidairPa0) 1 ``` Warning: Type mismatch in argument ‘cantype’ at (1); passed REAL(4) to INTEGER(4) [-Wargument-mismatch] EACO.EXT:487:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:486:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:485:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:484:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:483:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:482:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:481:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:480:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:479:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:478:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:477:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:476:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:475:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:474:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:473:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:472:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:351:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:184:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:119:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:37:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR solarangle.f mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR findlai.f mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR soilnox\_fx.F mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR soilnox.F mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR emproc.F CONST\_MEGAN.EXT:28:35: Error: Element in REAL(4) array constructor at (1) is INTEGER(4) emproc.F:652:45: ``` & NrCha,NrTyp,Canopychar, VNAME3D(s), 1 ``` Error: Symbol ‘canopychar’ at (1) has no IMPLICIT type EACO.EXT:487:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:486:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:485:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:484:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:483:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:482:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:481:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:480:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:479:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:478:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:477:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:476:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:475:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:474:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:473:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:472:30: Warning: Initialization string at (1) was truncated to fit the variable (16/36) EACO.EXT:351:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:184:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:119:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) EACO.EXT:37:16: Warning: Initialization string at (1) was truncated to fit the variable (16/18) makefile:34: recipe for target ‘emproc.o’ failed make: \*\*\* [emproc.o] Error 1 mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 checkmem.f mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 growseason.f mpifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 mgn2mech.F mgn2mech.F:57: Error: Can’t open included file ‘PARMS3.EXT’ makefile:29: recipe for target ‘mgn2mech.o’ failed make: \*\*\* [mgn2mech.o] Error 1 mpifort -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -c -o ioapi2uam.o ioapi2uam.f ioapi2uam.f:50: Error: Can’t open included file ‘PARMS3.EXT’ makefile:12: recipe for target ‘ioapi2uam.o’ failed make: \*\*\* [ioapi2uam.o] Error 1 Create symbolic links ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [June 3, 2019, 3:23pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/4 "2019-06-03T15:23:37Z")
First of all, you don’t really need “mpiifort” – which is a “wrapper” that calls “ifort” while knowing about MPI-parallel libraries, INCLUDE files, etc. – just “ifort” would have done just as well. Secondly, this is NOT YOUR FAULT: the code contains numerous violations of the Fortran language standard, and may happen to compile under (some versions of) the PGI compiler (though whether the result is correct is problematic); you can’t expect it to compile with anything else. The author needs to fix his code. (This is made worse by the fact that the code does not have the IMPLICIT NONE which is supposed to be found in all of our regulatory/research environmental codes.) In particular, here are some examples of problems: In CONST\_MEGAN.EXT , the “1” in the fourth line of the initialization of Canopychar (what an odd name for a REAL arra4, btw!) needs to be a “1.0”. That is the reason for the first error you mention. This then causes the second error you mention, in “emproc.F” In EACO.EXT, variable MGN\_NAM almost certainly needs to be CHARACTER_80 (or something like that), instead of CHARACTER_16. That is the reason for all those warnings you were seeing. In readpar.F, you have more illegal Fortran. The code should instead read: INTEGER, parameter :: mx=350,my=410,mz=30 INTEGER, parameter :: nlat=61,nlon=121 and (that missing IMPLICIT NONE again), variable “pgname” is nowhere defined; you need something like" CHARACTER\*16, PARAMETER :: pgname = ‘READPAR’ In cnvt\_efs.F, INTEGER, XREF(MXTCOL) needs to be INTEGER :: XREF(MXTCOL) and the rest of the errors in that routine are a result of this one. In canopy.F, the declaration of “Cantype” is incorrect --the caller is passing in an INTEGER in its CALL GAMME\_CE statement, and it is being _used_ as an INTEGER. The definition needs to match this. The code should instead have: REAL, INTENT(IN) :: LONG,LAT INTEGER,INTENT(IN) :: Cantype The Canopychar error is the result of the CONST\_MEGAN.EXT issue. For ioapi2uam.f, the Makefile needs to have (judging by the above) -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 3, 2019, 3:53pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/5 "2019-06-03T15:53:15Z")
Thanks a lot for your comprehensive response. What do you suggest I should do now? Thanks Catalyst ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [June 3, 2019, 7:11pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/6 "2019-06-03T19:11:35Z")
Make all the indicated changes, and let us know how it goes… ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 7, 2019, 4:20pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/7 "2019-06-07T16:20:51Z")
Dear @cjcoats, Having made the suggested changes, below is what I got: Removing \*.o rm: No match. Make all programs c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src met2mgn.f make: c: Command not found makefile:29: recipe for target ‘met2mgn.o’ failed make: [met2mgn.o] Error 127 (ignored) c -02 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src readpar.f make: c: Command not found makefile:31: recipe for target ‘readpar.o’ failed make: [readpar.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src readmcip.f make: c: Command not found makefile:33: recipe for target ‘readmcip.o’ failed make: [readmcip.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src micromet.f make: c: Command not found makefile:35: recipe for target ‘micromet.o’ failed make: [micromet.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src caldate.f make: c: Command not found makefile:37: recipe for target ‘caldate.o’ failed make: [caldate.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src lcpgeo.f make: c: Command not found makefile:39: recipe for target ‘lcpgeo.o’ failed make: [lcpgeo.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src interp\_lcp.f make: c: Command not found makefile:41: recipe for target ‘interp\_lcp.o’ failed make: [interp\_lcp.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src procmm5.f make: c: Command not found makefile:43: recipe for target ‘procmm5.o’ failed make: [procmm5.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src readmm5.f make: c: Command not found makefile:45: recipe for target ‘readmm5.o’ failed make: [readmm5.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src xtod.f make: c: Command not found makefile:47: recipe for target ‘xtod.o’ failed make: [xtod.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src vertmap.f make: c: Command not found makefile:49: recipe for target ‘vertmap.o’ failed make: [vertmap.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src juldate.f make: c: Command not found makefile:51: recipe for target ‘juldate.o’ failed make: [juldate.o] Error 127 (ignored) c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src utmgeo.f make: c: Command not found makefile:53: recipe for target ‘utmgeo.o’ failed make: [utmgeo.o] Error 127 (ignored) met2mgn.o readpar.o readmcip.o micromet.o caldate.o lcpgeo.o interp\_lcp.o procmm5.o readmm5.o xtod.o vertmap.o juldate.o utmgeo.o -L/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/Linux2\_x86\_64gfort -lioapi -L/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/lib -lnetcdff -lnetcdf -o met2mgn make: met2mgn.o: Command not found makefile:27: recipe for target ‘met2mgn’ failed make: \*\*\* [met2mgn] Error 127 ifort -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/TXT2IOAPI/INCLDIR -c -o parsline.o parsline.f make: ifort: Command not found makefile:19: recipe for target ‘parsline.o’ failed make: \*\*\* [parsline.o] Error 127 ifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/MEGANv2.10/src/EMPROC/INCLDIR gamma\_etc.f make: ifort: Command not found makefile:32: recipe for target ‘gamma\_etc.o’ failed make: \*\*\* [gamma\_etc.o] Error 127 ifort -c -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 checkmem.f make: ifort: Command not found makefile:27: recipe for target ‘checkmem.o’ failed make: \*\*\* [checkmem.o] Error 127 ifort -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 -c -o ioapi2uam.o ioapi2uam.f make: ifort: Command not found makefile:12: recipe for target ‘ioapi2uam.o’ failed make: \*\*\* [ioapi2uam.o] Error 127 Create symbolic links What do you suggest I do further? Also, can you please recommend any other model to process biogenic emissions for CMAQ for me? Thanks and regards. ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [June 11, 2019, 1:28pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/8 "2019-06-11T13:28:36Z")
Those “c -ffixed-form…” indicate that something is screwed up in your Makefile’s deflinition of compilers. What is \*make-\*variable `FC`? And the `met2mgn.o readpar.o ...` indicate that ssomething is wrong with the linker-definition, too, ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 20, 2019, 10:55am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/9 "2019-06-20T10:55:34Z")
@cjcoats @tlspero @bbaek @lizadams @rpedruzzi I run megan\_bio\_emiss model but got this error: NetCDF: Numeric conversion not representable Note: The following floating-point exceptions are signalling: IEEE\_INVALID\_FLAG STOP netcdf error [megan\_bio\_emiss.log](https://forum.cmascenter.org/uploads/short-url/eG1JqTS3qCkY1vhWHeJA3iDDYA2.txt) (4.6 KB) Attached is my megan\_bio\_emiss.log Kindly help me out, please. Thanks a lot. Catalyst ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [May 29, 2020, 9:20am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/10 "2020-05-29T09:20:10Z")
Dear @cjcoats @wong.david-c @lizadams, I am still having problems in getting this model compiled. Below is part of the error I got recently and attached is the full logfile of the error: EFS\_PFT.EXT:64:41: ``` & -1.0, -1.0, -1.0, -1.0, 1 ``` Error: Element in REAL(4) array constructor at (1) is INTEGER(4) SPC\_SAPRC99.EXT:29:60: ``` DATA MECH_SPC_SAPRC99( 1), MECH_MWT_SAPRC99( 1) / 'ISOPRENE ', 68.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:30:60: ``` DATA MECH_SPC_SAPRC99( 2), MECH_MWT_SAPRC99( 2) / 'TRP1 ', 136.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:31:60: ``` DATA MECH_SPC_SAPRC99( 3), MECH_MWT_SAPRC99( 3) / 'MEOH ', 32.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:32:60: ``` DATA MECH_SPC_SAPRC99( 4), MECH_MWT_SAPRC99( 4) / 'ACET ', 58.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:33:60: ``` DATA MECH_SPC_SAPRC99( 5), MECH_MWT_SAPRC99( 5) / 'CH4 ', 16.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:34:60: ``` DATA MECH_SPC_SAPRC99( 6), MECH_MWT_SAPRC99( 6) / 'NO ', 30.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:35:60: ``` DATA MECH_SPC_SAPRC99( 7), MECH_MWT_SAPRC99( 7) / 'NO2 ', 44.01 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:36:60: ``` DATA MECH_SPC_SAPRC99( 8), MECH_MWT_SAPRC99( 8) / 'NH3 ', 17.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:37:60: ``` DATA MECH_SPC_SAPRC99( 9), MECH_MWT_SAPRC99( 9) / 'CCHO ', 44.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:38:60: ``` DATA MECH_SPC_SAPRC99( 10), MECH_MWT_SAPRC99( 10) / 'HCOOH ', 46.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:39:60: ``` DATA MECH_SPC_SAPRC99( 11), MECH_MWT_SAPRC99( 11) / 'HCHO ', 30.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:40:60: ``` DATA MECH_SPC_SAPRC99( 12), MECH_MWT_SAPRC99( 12) / 'CCO_OH ', 60.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:41:60: ``` DATA MECH_SPC_SAPRC99( 13), MECH_MWT_SAPRC99( 13) / 'BALD ', 106.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:42:60: ``` DATA MECH_SPC_SAPRC99( 14), MECH_MWT_SAPRC99( 14) / 'MEK ', 72.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:43:60: ``` DATA MECH_SPC_SAPRC99( 15), MECH_MWT_SAPRC99( 15) / 'RCO_OH ', 74.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:44:60: ``` DATA MECH_SPC_SAPRC99( 16), MECH_MWT_SAPRC99( 16) / 'CO ', 28.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:45:60: ``` DATA MECH_SPC_SAPRC99( 17), MECH_MWT_SAPRC99( 17) / 'ETHENE ', 28.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:46:60: ``` DATA MECH_SPC_SAPRC99( 18), MECH_MWT_SAPRC99( 18) / 'ALK1 ', 30.10 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:47:60: ``` DATA MECH_SPC_SAPRC99( 19), MECH_MWT_SAPRC99( 19) / 'ALK2 ', 36.70 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:48:60: ``` DATA MECH_SPC_SAPRC99( 20), MECH_MWT_SAPRC99( 20) / 'ALK3 ', 58.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:49:60: ``` DATA MECH_SPC_SAPRC99( 21), MECH_MWT_SAPRC99( 21) / 'ALK4 ', 77.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:50:60: ``` DATA MECH_SPC_SAPRC99( 22), MECH_MWT_SAPRC99( 22) / 'ALK5 ', 118.90 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:51:60: ``` DATA MECH_SPC_SAPRC99( 23), MECH_MWT_SAPRC99( 23) / 'ARO1 ', 98.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99.EXT:52:60: ``` DATA MECH_SPC_SAPRC99( 24), MECH_MWT_SAPRC99( 24) / 'ARO2 ', 118.70 / 1 ``` SPC\_SAPRC99Q.EXT:32:64: ``` DATA MECH_SPC_SAPRC99_Q( 6), MECH_MWT_SAPRC99_Q( 6) / 'XC ', 12.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:33:64: ``` DATA MECH_SPC_SAPRC99_Q( 7), MECH_MWT_SAPRC99_Q( 7) / 'OLE1 ', 72.30 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:34:64: ``` DATA MECH_SPC_SAPRC99_Q( 8), MECH_MWT_SAPRC99_Q( 8) / 'MEOH ', 32.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:35:64: ``` DATA MECH_SPC_SAPRC99_Q( 9), MECH_MWT_SAPRC99_Q( 9) / 'ACET ', 58.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:36:64: ``` DATA MECH_SPC_SAPRC99_Q( 10), MECH_MWT_SAPRC99_Q( 10) / 'CH4 ', 16.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:37:64: ``` DATA MECH_SPC_SAPRC99_Q( 11), MECH_MWT_SAPRC99_Q( 11) / 'NH3 ', 17.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:38:64: ``` DATA MECH_SPC_SAPRC99_Q( 12), MECH_MWT_SAPRC99_Q( 12) / 'NO ', 30.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:39:64: ``` DATA MECH_SPC_SAPRC99_Q( 13), MECH_MWT_SAPRC99_Q( 13) / 'CCHO ', 44.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:40:64: ``` DATA MECH_SPC_SAPRC99_Q( 14), MECH_MWT_SAPRC99_Q( 14) / 'ALK3 ', 58.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:41:64: ``` DATA MECH_SPC_SAPRC99_Q( 15), MECH_MWT_SAPRC99_Q( 15) / 'HCOOH ', 46.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:42:64: ``` DATA MECH_SPC_SAPRC99_Q( 16), MECH_MWT_SAPRC99_Q( 16) / 'HCHO ', 30.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:43:64: ``` DATA MECH_SPC_SAPRC99_Q( 17), MECH_MWT_SAPRC99_Q( 17) / 'CCO_OH ', 75.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:44:64: ``` DATA MECH_SPC_SAPRC99_Q( 18), MECH_MWT_SAPRC99_Q( 18) / 'BALD ', 106.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:45:64: ``` DATA MECH_SPC_SAPRC99_Q( 19), MECH_MWT_SAPRC99_Q( 19) / 'MEK ', 72.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:46:64: ``` DATA MECH_SPC_SAPRC99_Q( 20), MECH_MWT_SAPRC99_Q( 20) / 'RCHO ', 58.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:47:64: ``` DATA MECH_SPC_SAPRC99_Q( 21), MECH_MWT_SAPRC99_Q( 21) / 'ALK4 ', 77.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:48:64: ``` DATA MECH_SPC_SAPRC99_Q( 22), MECH_MWT_SAPRC99_Q( 22) / 'ARO1 ', 98.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:49:64: ``` DATA MECH_SPC_SAPRC99_Q( 23), MECH_MWT_SAPRC99_Q( 23) / 'BACL ', 86.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:50:64: ``` DATA MECH_SPC_SAPRC99_Q( 24), MECH_MWT_SAPRC99_Q( 24) / 'CO ', 28.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:51:64: ``` DATA MECH_SPC_SAPRC99_Q( 25), MECH_MWT_SAPRC99_Q( 25) / 'ALK1 ', 30.10 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:52:64: ``` DATA MECH_SPC_SAPRC99_Q( 26), MECH_MWT_SAPRC99_Q( 26) / 'ETHENE ', 92.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC99Q.EXT:53:64: ``` DATA MECH_SPC_SAPRC99_Q( 27), MECH_MWT_SAPRC99_Q( 27) / 'ALK2 ', 36.70 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_CB05.EXT:26:72: ``` DATA MECH_SPC_CB05( 1), MECH_MWT_CB05( 1) / 'ISOP ', 80.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:27:72: ``` DATA MECH_SPC_CB05( 2), MECH_MWT_CB05( 2) / 'TERP ', 160.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:28:72: ``` DATA MECH_SPC_CB05( 3), MECH_MWT_CB05( 3) / 'PAR ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:29:72: ``` DATA MECH_SPC_CB05( 4), MECH_MWT_CB05( 4) / 'XYL ', 128.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:30:72: ``` DATA MECH_SPC_CB05( 5), MECH_MWT_CB05( 5) / 'OLE ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:31:72: ``` DATA MECH_SPC_CB05( 6), MECH_MWT_CB05( 6) / 'NR ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:32:72: ``` DATA MECH_SPC_CB05( 7), MECH_MWT_CB05( 7) / 'MEOH ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:33:72: ``` DATA MECH_SPC_CB05( 8), MECH_MWT_CB05( 8) / 'CH4 ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:34:72: ``` DATA MECH_SPC_CB05( 9), MECH_MWT_CB05( 9) / 'NH3 ', 17.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:35:72: ``` DATA MECH_SPC_CB05( 10), MECH_MWT_CB05( 10) / 'NO ', 46.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:36:72: ``` DATA MECH_SPC_CB05( 11), MECH_MWT_CB05( 11) / 'ALD2 ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:37:72: ``` DATA MECH_SPC_CB05( 12), MECH_MWT_CB05( 12) / 'ETOH ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:38:72: ``` DATA MECH_SPC_CB05( 13), MECH_MWT_CB05( 13) / 'FORM ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:39:72: ``` DATA MECH_SPC_CB05( 14), MECH_MWT_CB05( 14) / 'ALDX ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:40:72: ``` DATA MECH_SPC_CB05( 15), MECH_MWT_CB05( 15) / 'TOL ', 112.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:41:72: ``` DATA MECH_SPC_CB05( 16), MECH_MWT_CB05( 16) / 'IOLE ', 64.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:42:72: ``` DATA MECH_SPC_CB05( 17), MECH_MWT_CB05( 17) / 'CO ', 28.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:43:72: ``` DATA MECH_SPC_CB05( 18), MECH_MWT_CB05( 18) / 'ETHA ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB05.EXT:44:72: ``` DATA MECH_SPC_CB05( 19), MECH_MWT_CB05( 19) / 'ETH ', 28.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:27:70: ``` DATA MECH_SPC_CB6( 1), MECH_MWT_CB6( 1) / 'ISOP ', 80.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:28:72: ``` DATA MECH_SPC_CB6( 2), MECH_MWT_CB6( 2) / 'TERP ', 160.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:29:70: ``` DATA MECH_SPC_CB6( 3), MECH_MWT_CB6( 3) / 'PAR ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:30:72: ``` DATA MECH_SPC_CB6( 4), MECH_MWT_CB6( 4) / 'XYL ', 128.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:31:70: ``` DATA MECH_SPC_CB6( 5), MECH_MWT_CB6( 5) / 'OLE ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:32:70: ``` DATA MECH_SPC_CB6( 6), MECH_MWT_CB6( 6) / 'NR ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:33:70: ``` DATA MECH_SPC_CB6( 7), MECH_MWT_CB6( 7) / 'MEOH ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:34:70: ``` DATA MECH_SPC_CB6( 8), MECH_MWT_CB6( 8) / 'CH4 ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:35:70: ``` DATA MECH_SPC_CB6( 9), MECH_MWT_CB6( 9) / 'NH3 ', 17.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:36:70: ``` DATA MECH_SPC_CB6( 10), MECH_MWT_CB6( 10) / 'NO ', 46.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:37:70: ``` DATA MECH_SPC_CB6( 11), MECH_MWT_CB6( 11) / 'ALD2 ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:38:70: ``` DATA MECH_SPC_CB6( 12), MECH_MWT_CB6( 12) / 'ETOH ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:39:70: ``` DATA MECH_SPC_CB6( 13), MECH_MWT_CB6( 13) / 'FORM ', 16.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:40:70: ``` DATA MECH_SPC_CB6( 14), MECH_MWT_CB6( 14) / 'ALDX ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:41:72: ``` DATA MECH_SPC_CB6( 15), MECH_MWT_CB6( 15) / 'TOL ', 112.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:42:70: ``` DATA MECH_SPC_CB6( 16), MECH_MWT_CB6( 16) / 'IOLE ', 64.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:43:70: ``` DATA MECH_SPC_CB6( 17), MECH_MWT_CB6( 17) / 'CO ', 28.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:44:70: ``` DATA MECH_SPC_CB6( 18), MECH_MWT_CB6( 18) / 'ETHA ', 32.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:45:70: ``` DATA MECH_SPC_CB6( 19), MECH_MWT_CB6( 19) / 'ETH ', 28.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:46:70: ``` DATA MECH_SPC_CB6( 20), MECH_MWT_CB6( 20) / 'ETHY ', 26.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:47:70: ``` DATA MECH_SPC_CB6( 21), MECH_MWT_CB6( 21) / 'PRPA ', 44.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:48:70: ``` DATA MECH_SPC_CB6( 22), MECH_MWT_CB6( 22) / 'BENZ ', 78.00 / 1 ``` Error: Syntax error in DATA statement at (1) SPC\_CB6.EXT:49:70: ``` DATA MECH_SPC_CB6( 23), MECH_MWT_CB6( 23) / 'ACET ', 58.00 / 1 ``` SPC\_SAPRC07TQ.EXT:30:66: ``` DATA MECH_SPC_SAPRC07T_Q( 2), MECH_MWT_SAPRC07T_Q( 2) / 'TERP ', 136.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:31:66: ``` DATA MECH_SPC_SAPRC07T_Q( 3), MECH_MWT_SAPRC07T_Q( 3) / 'OLE2 ', 75.80 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:32:66: ``` DATA MECH_SPC_SAPRC07T_Q( 4), MECH_MWT_SAPRC07T_Q( 4) / 'ARO2 ', 118.70 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:33:66: ``` DATA MECH_SPC_SAPRC07T_Q( 5), MECH_MWT_SAPRC07T_Q( 5) / 'ALK5 ', 118.90 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:34:66: ``` DATA MECH_SPC_SAPRC07T_Q( 6), MECH_MWT_SAPRC07T_Q( 6) / 'SESQ ', 204.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:35:66: ``` DATA MECH_SPC_SAPRC07T_Q( 7), MECH_MWT_SAPRC07T_Q( 7) / 'OLE1 ', 72.30 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:36:66: ``` DATA MECH_SPC_SAPRC07T_Q( 8), MECH_MWT_SAPRC07T_Q( 8) / 'MEOH ', 32.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:37:66: ``` DATA MECH_SPC_SAPRC07T_Q( 9), MECH_MWT_SAPRC07T_Q( 9) / 'ACET ', 58.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:38:66: ``` DATA MECH_SPC_SAPRC07T_Q( 10), MECH_MWT_SAPRC07T_Q( 10) / 'CH4 ', 16.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:39:66: ``` DATA MECH_SPC_SAPRC07T_Q( 11), MECH_MWT_SAPRC07T_Q( 11) / 'NH3 ', 17.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:40:66: ``` DATA MECH_SPC_SAPRC07T_Q( 12), MECH_MWT_SAPRC07T_Q( 12) / 'NO ', 30.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:41:66: ``` DATA MECH_SPC_SAPRC07T_Q( 13), MECH_MWT_SAPRC07T_Q( 13) / 'CCHO ', 44.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:42:66: ``` DATA MECH_SPC_SAPRC07T_Q( 14), MECH_MWT_SAPRC07T_Q( 14) / 'ALK3 ', 58.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:43:66: ``` DATA MECH_SPC_SAPRC07T_Q( 15), MECH_MWT_SAPRC07T_Q( 15) / 'FACD ', 46.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:44:66: ``` DATA MECH_SPC_SAPRC07T_Q( 16), MECH_MWT_SAPRC07T_Q( 16) / 'HCHO ', 30.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:45:66: ``` DATA MECH_SPC_SAPRC07T_Q( 17), MECH_MWT_SAPRC07T_Q( 17) / 'AACD ', 60.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:46:66: ``` DATA MECH_SPC_SAPRC07T_Q( 18), MECH_MWT_SAPRC07T_Q( 18) / 'BALD ', 106.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:47:66: ``` DATA MECH_SPC_SAPRC07T_Q( 19), MECH_MWT_SAPRC07T_Q( 19) / 'MEK ', 72.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:48:66: ``` DATA MECH_SPC_SAPRC07T_Q( 20), MECH_MWT_SAPRC07T_Q( 20) / 'RCHO ', 58.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:49:66: ``` DATA MECH_SPC_SAPRC07T_Q( 21), MECH_MWT_SAPRC07T_Q( 21) / 'ALK4 ', 77.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:50:66: ``` DATA MECH_SPC_SAPRC07T_Q( 22), MECH_MWT_SAPRC07T_Q( 22) / 'ARO1 ', 98.60 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:51:66: ``` DATA MECH_SPC_SAPRC07T_Q( 23), MECH_MWT_SAPRC07T_Q( 23) / 'BACL ', 86.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:52:66: ``` DATA MECH_SPC_SAPRC07T_Q( 24), MECH_MWT_SAPRC07T_Q( 24) / 'CO ', 28.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:53:66: ``` DATA MECH_SPC_SAPRC07T_Q( 25), MECH_MWT_SAPRC07T_Q( 25) / 'ALK1 ', 30.10 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:54:66: ``` DATA MECH_SPC_SAPRC07T_Q( 26), MECH_MWT_SAPRC07T_Q( 26) / 'ETHE ', 28.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:55:66: ``` DATA MECH_SPC_SAPRC07T_Q( 27), MECH_MWT_SAPRC07T_Q( 27) / 'ALK2 ', 36.70 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:56:66: ``` DATA MECH_SPC_SAPRC07T_Q( 28), MECH_MWT_SAPRC07T_Q( 28) / 'PRPE ', 42.10 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:57:66: ``` DATA MECH_SPC_SAPRC07T_Q( 29), MECH_MWT_SAPRC07T_Q( 29) / 'APIN ', 136.00 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:58:66: ``` DATA MECH_SPC_SAPRC07T_Q( 30), MECH_MWT_SAPRC07T_Q( 30) / 'TOLU ', 92.10 / 1 ``` Error: Unterminated character constant beginning at (1) SPC\_SAPRC07TQ.EXT:59:66: ``` DATA MECH_SPC_SAPRC07T_Q( 31), MECH_MWT_SAPRC07T_Q( 31) / 'ETOH ', 46.10 / 1 ``` Error: Unterminated character constant beginning at (1) mgn2mech.F:596:16: ``` IF ( ef_all(1,nmpmg) .LT. 0.0) THEN 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:616:35: ``` TMP3 = TMP3 + ef_all(I,nmpmg) * effs_all(I,nmpsp) 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:626:15: ``` IF (ef_all(1,INO) .LT. 0.0) THEN 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:639:17: ``` IF (ef_all(1,INO) .LT. 0.0) THEN 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:649:49: ``` G2CRatio = ef_all(14,INO)/ef_all(I,INO) 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:665:37: ``` TMO3 = TMO3 + ef_all(I,INO)*effs_all(I,nmpsp) 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:669:37: ``` TMO3 = TMO3 + ef_all(14,INO) * effs_all(I,nmpsp) 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:681:17: ``` IF (ef_all(1,INO) .LT. 0.0) THEN 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:708:37: ``` TMO3 = TMO3 + ef_all(I,INO)*effs_all(I,nmpsp)* 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type mgn2mech.F:712:37: ``` TMO3 = TMO3 + ef_all(I,INO)*effs_all(I,nmpsp)* 1 ``` Error: Function ‘ef\_all’ at (1) has no IMPLICIT type Thanks in anticipation for your help.[logfile.txt](https://forum.cmascenter.org/uploads/short-url/sQ2m37VMIiixfgNnEKbtJ222G5c.txt) (39.3 KB) ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [May 29, 2020, 10:33am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/11 "2020-05-29T10:33:42Z")
This code is not following the Fortran Standard for source format, instead using a non-Standard “fixed-132” source format (as does CMAQ). You will need to use a compiler-specific additional compile-flag in order to get the compiler to recognize this format correctly: see _make_-variable `E132` in your _ioapi/Makeinclude.$BIN_ See also [https://cjcoats.github.io/ioapi/AVAIL.html#cmaq](https://cjcoats.github.io/ioapi/AVAIL.html#cmaq) See also [https://sourceforge.net/projects/findent/](https://sourceforge.net/projects/findent/) for an excellent tool _findent_ for transforming this and other codes into Standard-conforming free-format Fortran. ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [May 29, 2020, 12:01pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/12 "2020-05-29T12:01:29Z")
Dear @cjcoats, Thanks for the prompt response. I have just installed the findent but I don’t know how to use it for this purpose. Can you please guide me, sir? Thanks in anticipation ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [May 29, 2020, 12:11pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/13 "2020-05-29T12:11:06Z")
What I was suggesting for you is that you use the value of `E132` as one of the compile-flags for MEGAN. I was suggesting to the authors of MEGAN that they use this excellent tool _findent_ to turn their code into legal Fortran. ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [May 29, 2020, 12:14pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/14 "2020-05-29T12:14:45Z")
Dear @cjcoats, Ok sir. Here is the value of my E132: E132 = -ffixed-line-length-132 But I have used it as shown below and still got the same error: #SHELL=/bin/sh #FC= gfortran FC= gfortran #FC= ifort #FC= mpifort #FFLAGS= -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 PROGRAM = mgn2mech LIBS = -L/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/Linux2\_x86\_64gfort -lioapi -L/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/lib -lnetcdff -lnetcdf INCLUDE = -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/netcdf/include -I$(CURDIR)/INCLDIR #INC = -I/home/catalyst/Desktop/Build\_WRF/LIBRARIES/ioapi-3.2/ioapi/fixed\_src #FFLAGS= -ffixed-form -ffixed-line-length-132 -funroll-loops -finit-character=32 #FFLAGS= -ffixed-form -ffixed-line-length-132 -O3 -funroll-loops -finit-character=32 #FFLAGS= -ffixed-line-length-132 #FFLAGS= -132 -check all -traceback $(INCLUDE) FFLAGS= -ffree-line-length-none #FFLAGS= -ffixed-line-length-none #FFLAGS= -02 #LINK\_FLAGS = -fopenmp OBJS = checkmem.o growseason.o $(PROGRAM).o ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 5, 2020, 11:31am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/15 "2020-06-05T11:31:30Z")
Dear @cjcoats, @wong.david-c, @lizadams, @bbaek, @dazhong.yin I encountered this error while compiling a program: ``` **GC\_SPC.EXT:20:72:** DATA GC_SPC( 1), GC_MOLWT( 1) / 'NO2 ', 46.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:21:72:**DATA GC_SPC( 2), GC_MOLWT( 2) / 'NO ', 30.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:22:72:** DATA GC_SPC( 3), GC_MOLWT( 3) / 'O3P ', 16.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:23:72:**DATA GC_SPC( 4), GC_MOLWT( 4) / 'O3 ', 48.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:24:72:** DATA GC_SPC( 5), GC_MOLWT( 5) / 'NO3 ', 62.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:25:72:**DATA GC_SPC( 6), GC_MOLWT( 6) / 'N2O5 ', 108.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:26:72:** DATA GC_SPC( 7), GC_MOLWT( 7) / 'HNO3 ', 63.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:27:72:**DATA GC_SPC( 8), GC_MOLWT( 8) / 'O1D2 ', 16.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:28:72:** DATA GC_SPC( 9), GC_MOLWT( 9) / 'HO ', 17.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:29:72:**DATA GC_SPC( 10), GC_MOLWT( 10) / 'HONO ', 47.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:30:72:** DATA GC_SPC( 11), GC_MOLWT( 11) / 'HO2 ', 33.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:31:72:**DATA GC_SPC( 12), GC_MOLWT( 12) / 'CO ', 28.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:32:72:** DATA GC_SPC( 13), GC_MOLWT( 13) / 'HNO4 ', 79.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:33:72:**DATA GC_SPC( 14), GC_MOLWT( 14) / 'HO2H ', 34.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:34:72:** DATA GC_SPC( 15), GC_MOLWT( 15) / 'SO2 ', 64.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:35:72:**DATA GC_SPC( 16), GC_MOLWT( 16) / 'SULF ', 98.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:36:72:** DATA GC_SPC( 17), GC_MOLWT( 17) / 'SULRXN ', 98.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:37:72:**DATA GC_SPC( 18), GC_MOLWT( 18) / 'C_O2 ', 47.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:38:72:** DATA GC_SPC( 19), GC_MOLWT( 19) / 'HCHO ', 30.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:39:72:**DATA GC_SPC( 20), GC_MOLWT( 20) / 'COOH ', 48.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:40:72:** DATA GC_SPC( 21), GC_MOLWT( 21) / 'MEOH ', 32.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:41:72:**DATA GC_SPC( 22), GC_MOLWT( 22) / 'RO2_R ', 1.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:42:72:** DATA GC_SPC( 23), GC_MOLWT( 23) / 'ROOH ', 62.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:43:72:**DATA GC_SPC( 24), GC_MOLWT( 24) / 'R2O2 ', 1.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:44:72:** DATA GC_SPC( 25), GC_MOLWT( 25) / 'RO2_N ', 1.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:45:72:**DATA GC_SPC( 26), GC_MOLWT( 26) / 'RNO3 ', 133.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:46:72:** DATA GC_SPC( 27), GC_MOLWT( 27) / 'MEK ', 72.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:47:72:**DATA GC_SPC( 28), GC_MOLWT( 28) / 'PROD2 ', 100.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:48:72:** DATA GC_SPC( 29), GC_MOLWT( 29) / 'CCO_O2 ', 75.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:49:72:**DATA GC_SPC( 30), GC_MOLWT( 30) / 'PAN ', 121.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:50:72:** DATA GC_SPC( 31), GC_MOLWT( 31) / 'CCO_OOH ', 76.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:51:72:**DATA GC_SPC( 32), GC_MOLWT( 32) / 'CCO_OH ', 60.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:52:72:** DATA GC_SPC( 33), GC_MOLWT( 33) / 'RCO_O2 ', 89.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:53:72:**DATA GC_SPC( 34), GC_MOLWT( 34) / 'PAN2 ', 135.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:54:72:** DATA GC_SPC( 35), GC_MOLWT( 35) / 'CCHO ', 44.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:55:72:**DATA GC_SPC( 36), GC_MOLWT( 36) / 'RCO_OOH ', 90.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:56:72:** DATA GC_SPC( 37), GC_MOLWT( 37) / 'RCO_OH ', 74.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:57:72:**DATA GC_SPC( 38), GC_MOLWT( 38) / 'BZCO_O2 ', 137.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:58:72:** DATA GC_SPC( 39), GC_MOLWT( 39) / 'PBZN ', 183.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:59:72:**DATA GC_SPC( 40), GC_MOLWT( 40) / 'BZ_O ', 93.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:60:72:** DATA GC_SPC( 41), GC_MOLWT( 41) / 'MA_RCO3 ', 101.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:61:72:**DATA GC_SPC( 42), GC_MOLWT( 42) / 'MA_PAN ', 147.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:62:72:** DATA GC_SPC( 43), GC_MOLWT( 43) / 'TBU_O ', 73.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:63:72:**DATA GC_SPC( 44), GC_MOLWT( 44) / 'ACET ', 58.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:64:72:** DATA GC_SPC( 45), GC_MOLWT( 45) / 'NPHE ', 139.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:65:72:**DATA GC_SPC( 46), GC_MOLWT( 46) / 'PHEN ', 94.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:66:72:** DATA GC_SPC( 47), GC_MOLWT( 47) / 'BZNO2_O ', 139.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:67:72:**DATA GC_SPC( 48), GC_MOLWT( 48) / 'HOCOO ', 63.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:68:72:** DATA GC_SPC( 49), GC_MOLWT( 49) / 'HCOOH ', 46.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:69:72:**DATA GC_SPC( 50), GC_MOLWT( 50) / 'RCHO ', 58.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:70:72:** DATA GC_SPC( 51), GC_MOLWT( 51) / 'GLY ', 58.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:71:72:**DATA GC_SPC( 52), GC_MOLWT( 52) / 'MGLY ', 72.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:72:72:** DATA GC_SPC( 53), GC_MOLWT( 53) / 'BACL ', 86.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:73:72:**DATA GC_SPC( 54), GC_MOLWT( 54) / 'CRES ', 108.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:74:72:** DATA GC_SPC( 55), GC_MOLWT( 55) / 'BALD ', 106.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:75:72:**DATA GC_SPC( 56), GC_MOLWT( 56) / 'MACR ', 70.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:76:72:** DATA GC_SPC( 57), GC_MOLWT( 57) / 'MVK ', 70.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:77:72:**DATA GC_SPC( 58), GC_MOLWT( 58) / 'IPROD ', 70.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:78:72:** DATA GC_SPC( 59), GC_MOLWT( 59) / 'DCB1 ', 58.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:79:72:**DATA GC_SPC( 60), GC_MOLWT( 60) / 'DCB2 ', 72.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:80:72:** DATA GC_SPC( 61), GC_MOLWT( 61) / 'DCB3 ', 72.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:81:72:**DATA GC_SPC( 62), GC_MOLWT( 62) / 'ETHENE ', 28.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:82:72:** DATA GC_SPC( 63), GC_MOLWT( 63) / 'ISOPRENE ', 68.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:83:72:**DATA GC_SPC( 64), GC_MOLWT( 64) / 'ISOPRXN ', 68.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:84:72:** DATA GC_SPC( 65), GC_MOLWT( 65) / 'TRP1 ', 136.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:85:72:**DATA GC_SPC( 66), GC_MOLWT( 66) / 'TRPRXN ', 136.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:86:72:** DATA GC_SPC( 67), GC_MOLWT( 67) / 'ALK1 ', 30.1 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:87:72:**DATA GC_SPC( 68), GC_MOLWT( 68) / 'ALK2 ', 36.7 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:88:72:** DATA GC_SPC( 69), GC_MOLWT( 69) / 'ALK3 ', 58.6 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:89:72:**DATA GC_SPC( 70), GC_MOLWT( 70) / 'ALK4 ', 77.6 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:90:72:** DATA GC_SPC( 71), GC_MOLWT( 71) / 'ALK5 ', 118.9 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:91:72:**DATA GC_SPC( 72), GC_MOLWT( 72) / 'ALK5RXN ', 118.9 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:92:72:** DATA GC_SPC( 73), GC_MOLWT( 73) / 'ARO1 ', 98.6 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:93:72:**DATA GC_SPC( 74), GC_MOLWT( 74) / 'ARO1RO2 ', 147.6 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:94:72:** DATA GC_SPC( 75), GC_MOLWT( 75) / 'TOLNRXN ', 147.6 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:95:72:**DATA GC_SPC( 76), GC_MOLWT( 76) / 'TOLHRXN ', 147.6 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:96:72:** DATA GC_SPC( 77), GC_MOLWT( 77) / 'ARO2 ', 118.7 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:97:72:**DATA GC_SPC( 78), GC_MOLWT( 78) / 'ARO2RO2 ', 167.7 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:98:72:** DATA GC_SPC( 79), GC_MOLWT( 79) / 'XYLNRXN ', 167.7 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:99:72:**DATA GC_SPC( 80), GC_MOLWT( 80) / 'XYLHRXN ', 167.7 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:100:72:** DATA GC_SPC( 81), GC_MOLWT( 81) / 'BENZENE ', 78.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:101:72:**DATA GC_SPC( 82), GC_MOLWT( 82) / 'BENZRO2 ', 127.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:102:72:** DATA GC_SPC( 83), GC_MOLWT( 83) / 'BNZNRXN ', 127.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:103:72:**DATA GC_SPC( 84), GC_MOLWT( 84) / 'BNZHRXN ', 127.0 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:104:72:** DATA GC_SPC( 85), GC_MOLWT( 85) / 'OLE1 ', 72.3 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:105:72:**DATA GC_SPC( 86), GC_MOLWT( 86) / 'OLE2 ', 75.8 /**1 ****Error:** Syntax error in DATA statement at (1) **GC\_SPC.EXT:106:72:** DATA GC_SPC( 87), GC_MOLWT( 87) / 'SESQ ', 204.0 / **1**** Error:**Syntax error in DATA statement at (1)**GC\_SPC.EXT:107:72:**DATA GC_SPC( 88), GC_MOLWT( 88) / 'SESQRXN ', 204.0 /**1 ****Error:** Syntax error in DATA statement at (1) ``` Your help would be highly appreciated. I am using gfortran compiler. Thanks in anticipation. Catalyst ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [June 5, 2020, 11:43am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/16 "2020-06-05T11:43:03Z")
This looks like the authors are using a non-Standard “fixed-132” source format. Look for _make_-variable `E132` in your compiler’s _ioapi/Makeinclude.$BIN_ and add that to your compile-flags. **WHY can’t code-authors stop using 30-years-obsolete “fixed” Fortran source-formats** and start using the “free” format, that is not subject to this kind of problem. If they wish to convert the obsolete formats to the current one, a good tool is _findent_, which you can get from here: [https://sourceforge.net/projects/findent/](https://sourceforge.net/projects/findent/) ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [June 5, 2020, 11:44am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/17 "2020-06-05T11:44:16Z")
…or else why can’t they get their _Makefile_s right? There are certainly enough examples that do get it right. ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 5, 2020, 12:00pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/18 "2020-06-05T12:00:03Z")
@cjcoats, Thanks for your response. I used this flags but still got the same error: FC\_FLAGS = {E132} (ARCHFLAGS) (FOPTFLAGS) (ARCHFLAGS) $(OMPFLAGS) What else should I do to fix it, please? Catalyst ---
**Author:** ![cjcoats](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cjcoats](https://forum.cmascenter.org/u/cjcoats)\ **Post date:** [June 5, 2020, 12:21pm UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/19 "2020-06-05T12:21:06Z")
Looking at a copy of _GC\_SPC.EXT_ I have: it unnecessarily runs past column 72: the `DATA` lines all have DATA followed by 10 blanks, of which 9 are unnecessary. Use your favorite method to replace that 14-character sequence by the 5-character sequence "`DATA` " – your favorite text editor will do it, or you can use command-line utility _sed_: cat GC\_SPC.EXT | sed -e ‘s/DATA /DATA /’ \> GC\_SPC.EXT.good mv -f GC\_SPC.EXT.good GC\_SPC.EXT For my _GC\_SPC.EXT_, that yields a file that goes only to column 69. ---
**Author:** ![Catalyst2682](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@Catalyst2682](https://forum.cmascenter.org/u/Catalyst2682)\ **Post date:** [June 6, 2020, 3:26am UTC](https://forum.cmascenter.org/t/megan-2-1-installation-error/727/20 "2020-06-06T03:26:51Z")
@cjcoats, Your suggestion has worked perfectly. Thanks so much and best regards sir, Catalyst [Next page](https://forum.cmascenter.org/t/megan-2-1-installation-error/727.md?page=2)