# SAPRC gspro files for 2016v2 EMP

**URL:** <https://forum.cmascenter.org/t/saprc-gspro-files-for-2016v2-emp/2771>\
**Category:** Chemical Speciation Issues\
**Tags:** smoke\
**Created:** [November 2, 2021, 5:47pm UTC](https://forum.cmascenter.org/t/saprc-gspro-files-for-2016v2-emp/2771 "2021-11-02T17:47:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![carlossahin](https://avatars.discourse-cdn.com/v4/letter/c/85f322/32.png) [@carlossahin](https://forum.cmascenter.org/u/carlossahin)\
**Post date:** [November 2, 2021, 5:47pm UTC](https://forum.cmascenter.org/t/saprc-gspro-files-for-2016v2-emp/2771/1 "2021-11-02T17:47:57Z")

</div>

Hello! I’m using the following SAPRC gspro files for the 2016v2 emissions modeling platform:

[https://gaftp.epa.gov/Air/emismod/2017/ancillary\_data/ge\_dat\_for\_2017gb\_speciation\_SAPRC\_15jan2021.zip](https://gaftp.epa.gov/Air/emismod/2017/ancillary_data/ge_dat_for_2017gb_speciation_SAPRC_15jan2021.zip)

I’ve noticed that at least two new profiles have been introduced (CBMPWWY for np\_oilgas and vcpy for solvents) to the 2016v2 EMP. Unfortunately these profiles are not included in the aforementioned gspro files, which lead to errors when running SPCMAT.

Are updated SAPRC gspro files available for the 2016v2 EMP? From what I can tell, it appears that these profiles are not available in the SPECIATE database (please correct me if I am wrong).

Any guidance with this issue would be greatly appreciated! 🙂

Best,  
Carlos

---

<div class="post-metadata">

**Author:** ![eyth.alison](https://avatars.discourse-cdn.com/v4/letter/e/7ab992/32.png) [@eyth.alison](https://forum.cmascenter.org/u/eyth.alison)\
**Post date:** [November 3, 2021, 1:36pm UTC](https://forum.cmascenter.org/t/saprc-gspro-files-for-2016v2-emp/2771/2 "2021-11-03T13:36:25Z")

</div>

We are in the process of upgrading to some new speciation profiles for that sector.

We will probably have the referenced profile available to support SAPRC in the next couple of weeks and will post it once ready.

In the meantime, you could change CBMPWWY to 1207 in the GSREF file.

---

<div class="post-metadata">

**Author:** ![carlossahin](https://avatars.discourse-cdn.com/v4/letter/c/85f322/32.png) [@carlossahin](https://forum.cmascenter.org/u/carlossahin)\
**Post date:** [December 15, 2021, 10:20pm UTC](https://forum.cmascenter.org/t/saprc-gspro-files-for-2016v2-emp/2771/3 "2021-12-15T22:20:39Z")

</div>

I had an additional question about running SAPRC for the othpt and onroad\_mex sectors, as these are pre-speciated for CB06. Assuming all the relevant SARPC profiles in gspro are available, is it possible to back-calculate the total amount of VOCs from the CB06-speciated VOC inventory files, and then run SMOKE as usual?

For othpt, the solution seems even simpler, as one could make a copy of the “canada\_MYR\_2016\_point\_VOC\_INV\_monthly\_27dec2020\_v0.csv” file, and just rename all “VOC\_INV” pollutants to “VOC” (that way they are speciated in SPCMAT)?

This seems a bit too good to be true, so I wanted to check if this method would be appropriate.

Many thanks in advance!

---

<div class="post-metadata">

**Author:** ![eyth.alison](https://avatars.discourse-cdn.com/v4/letter/e/7ab992/32.png) [@eyth.alison](https://forum.cmascenter.org/u/eyth.alison)\
**Post date:** [December 15, 2021, 10:37pm UTC](https://forum.cmascenter.org/t/saprc-gspro-files-for-2016v2-emp/2771/4 "2021-12-15T22:37:21Z")

</div>

Did you already try to use onroad as nonpoint for SAPRC package posted with the 2017 platform?

[https://gaftp.epa.gov/Air/emismod/2017/onroad\_as\_nonpoint\_saprc\_speciation\_scripts\_inputs.zip](https://gaftp.epa.gov/Air/emismod/2017/onroad_as_nonpoint_saprc_speciation_scripts_inputs.zip)

[https://gaftp.epa.gov/Air/emismod/2017/onroad\_as\_nonpoint\_saprc\_speciation\_scripts\_inputs\_contents.txt](https://gaftp.epa.gov/Air/emismod/2017/onroad_as_nonpoint_saprc_speciation_scripts_inputs_contents.txt)

Your solution for othpt sounds reasonable

---

<div class="post-metadata">

**Author:** ![carlossahin](https://avatars.discourse-cdn.com/v4/letter/c/85f322/32.png) [@carlossahin](https://forum.cmascenter.org/u/carlossahin)\
**Post date:** [January 5, 2022, 5:00pm UTC](https://forum.cmascenter.org/t/saprc-gspro-files-for-2016v2-emp/2771/5 "2022-01-05T17:00:32Z")

</div>

Thank you Alison! Was able to run othpt and onroad\_mex successfully for SAPRC07.

For anyone else reading this that may be interested, the process for onroad\_mex essentially involves updating the gspro file with that from the “onroad\_as\_nonpoint\_saprc” package, updating the invtable to exclude carbon bond VOC species, and updating the input file to rename “VOC\_INV” pollutants to “VOC”.