# SMOKE v4.81 installtion issue: make: \*\*\* \[rdemspd.o\] Error 1 **URL:** \ **Category:** Run Errors and Warnings\ **Tags:** admin, smoke, smoke-481\ **Created:** [March 8, 2022, 2:46pm UTC](https://forum.cmascenter.org/t/smoke-v4-81-installtion-issue-make-rdemspd-o-error-1/3087 "2022-03-08T14:46:21Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Iqbal](https://avatars.discourse-cdn.com/v4/letter/i/bc8723/32.png) [@Iqbal](https://forum.cmascenter.org/u/Iqbal)\ **Post date:** [March 8, 2022, 2:46pm UTC](https://forum.cmascenter.org/t/smoke-v4-81-installtion-issue-make-rdemspd-o-error-1/3087/1 "2022-03-08T14:46:21Z")
Hello @bbaek @cjcoats Using GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44) compiler, I successfully installed and compiled Netcdf4.7.4 and IOPAI3.2. But when I tried to install SMOKEv4.81, I am getting following error: > AUTO\_ARRAYS=1 -DF90=1 -DFLDMN=1 -DFSTR\_L=int -DIOAPI\_NO\_STDOUT=1 -DNEED\_ARGS=1 -DIOAPI\_NCF4=1 -c /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/smkinven/rddatantifr.f > cd /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/…/Linux2\_x86\_64gfort; gfortran -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/ioapi/fixed\_src -I/home/Iqbal/Documents/SMOKE481/subsys/smoke/src/inc -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/Linux2\_x86\_64gfort -ffixed-line-length-132 -fno-backslash -O3 -ffast-math -funroll-loops -m64 -DAUTO\_ARRAYS=1 -DF90=1 -DFLDMN=1 -DFSTR\_L=int -DIOAPI\_NO\_STDOUT=1 -DNEED\_ARGS=1 -DIOAPI\_NCF4=1 -c /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/smkinven/rddatantimb.f > cd /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/…/Linux2\_x86\_64gfort; gfortran -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/ioapi/fixed\_src -I/home/Iqbal/Documents/SMOKE481/subsys/smoke/src/inc -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/Linux2\_x86\_64gfort -ffixed-line-length-132 -fno-backslash -O3 -ffast-math -funroll-loops -m64 -DAUTO\_ARRAYS=1 -DF90=1 -DFLDMN=1 -DFSTR\_L=int -DIOAPI\_NO\_STDOUT=1 -DNEED\_ARGS=1 -DIOAPI\_NCF4=1 -c /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/smkinven/rddatantinp.f > cd /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/…/Linux2\_x86\_64gfort; gfortran -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/ioapi/fixed\_src -I/home/Iqbal/Documents/SMOKE481/subsys/smoke/src/inc -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/Linux2\_x86\_64gfort -ffixed-line-length-132 -fno-backslash -O3 -ffast-math -funroll-loops -m64 -DAUTO\_ARRAYS=1 -DF90=1 -DFLDMN=1 -DFSTR\_L=int -DIOAPI\_NO\_STDOUT=1 -DNEED\_ARGS=1 -DIOAPI\_NCF4=1 -c /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/smkinven/rddatantipt.f > cd /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/…/Linux2\_x86\_64gfort; gfortran -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/ioapi/fixed\_src -I/home/Iqbal/Documents/SMOKE481/subsys/smoke/src/inc -I/home/Iqbal/Documents/SMOKE481/subsys/ioapi/Linux2\_x86\_64gfort -ffixed-line-length-132 -fno-backslash -O3 -ffast-math -funroll-loops -m64 -DAUTO\_ARRAYS=1 -DF90=1 -DFLDMN=1 -DFSTR\_L=int -DIOAPI\_NO\_STDOUT=1 -DNEED\_ARGS=1 -DIOAPI\_NCF4=1 -c /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/smkinven/rdemspd.f > /home/Iqbal/Documents/SMOKE481/subsys/smoke/src/smkinven/rdemspd.f:304.15: > > ``` > LFIP = '' > 1 > > ``` > > Error: Can’t convert CHARACTER(1) to INTEGER(4) at (1) > make: \*\*\* [rdemspd.o] Error 1 Would you please help me? I don’t understand what changes to make in rdemspd.f file. I can see three LFIP occurance. Thanks in advance Note: I did install v4.7 using the same setting last year. ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [March 9, 2022, 3:24pm UTC](https://forum.cmascenter.org/t/smoke-v4-81-installtion-issue-make-rdemspd-o-error-1/3087/2 "2022-03-09T15:24:46Z")
> [@SMOKE compiled with GCC](https://forum.cmascenter.org/t/smoke-compiled-with-gcc/2735/11): > > Actually, I ran into an error while compiling: /home/centos/PREPRO/SMOKE/subsys/smoke/src/smkinven/rdemspd.f:304:15: 304 | LFIP = '' | 1 Error: Cannot convert CHARACTER(0) to INTEGER(4) at (1) make: \*\*\* [Makefile:349: rdemspd.o] Error 1 /home/centos/PREPRO/SMOKE/subsys/smoke/src/smkinven/rdorlfr.f:493:15: 493 | LFIP = '' | 1 Error: Cannot convert CHARACTER(0) to INTEGER(4) at (1) make: \*\*\* [Makefile:349: rdorlfr.o] Error 1 LFIP is … ---
**Author:** ![Iqbal](https://avatars.discourse-cdn.com/v4/letter/i/bc8723/32.png) [@Iqbal](https://forum.cmascenter.org/u/Iqbal)\ **Post date:** [March 9, 2022, 4:07pm UTC](https://forum.cmascenter.org/t/smoke-v4-81-installtion-issue-make-rdemspd-o-error-1/3087/3 "2022-03-09T16:07:18Z")
Thank you so much. It works ---
**Author:** ![Iqbal](https://avatars.discourse-cdn.com/v4/letter/i/bc8723/32.png) [@Iqbal](https://forum.cmascenter.org/u/Iqbal)\ **Post date:** [March 9, 2022, 5:08pm UTC](https://forum.cmascenter.org/t/smoke-v4-81-installtion-issue-make-rdemspd-o-error-1/3087/4 "2022-03-09T17:08:46Z")
Hellp @bbaek I encounter a weird problem. I can not find “install\_diffs.txt” file. So, after successful installation, I checked all the files in $LOGS directory which shows “Normal Completion”. Then I run the QA script . The output shows " Differences between your installation and correct answers exist! Please refer to file $SMKROOT/doc/install\_diffs.txt for details.". > [Iqbal@ADEQPlanning SMOKE481]$ cd LOGS [Iqbal@ADEQPlanning logs] grep ERROR \* > smkinven.area.nctox.log: Value for SMK\_MAXERROR: 100 > smkinven.nonroad.nctox.log: Value for SMK\_MAXERROR: 100 > smkinven.point.nctox.log: Value for SMK\_MAXERROR: 100 > smkinven.rateperdistance.nctox.log: Value for SMK\_MAXERROR: 900000 > smkinven.rateperhour.nctox.log: Value for SMK\_MAXERROR: 900000 > smkinven.rateperprofile.nctox.log: Value for SMK\_MAXERROR: 900000 > smkinven.ratepervehicle.nctox.log: Value for SMK\_MAXERROR: 900000 > spcmat.area.nctox.cmaq\_cb05\_soa.log: Value for SMK\_MAXERROR: 100 > spcmat.area.nctox.cmaq\_cb05\_soa.log: Value for DEFAULT\_CONV\_FAC\_ERROR not defined;returning default: FALSE > spcmat.nonroad.nctox.cmaq\_cb05\_soa.log: Value for SMK\_MAXERROR: 100 > spcmat.nonroad.nctox.cmaq\_cb05\_soa.log: Value for DEFAULT\_CONV\_FAC\_ERROR not defined;returning default: FALSE > spcmat.nonroad.nctox.cmaq\_cb05\_soa.log: Value for SMK\_MAXERROR: 100 > spcmat.point.nctox.cmaq\_cb05\_soa.log: Value for SMK\_MAXERROR: 100 > spcmat.point.nctox.cmaq\_cb05\_soa.log: Value for DEFAULT\_CONV\_FAC\_ERROR not defined;returning default: FALSE > temporal.area.nctox.20050710.log: Value for SMK\_MAXERROR: 100 > temporal.nonroad.nctox.20050710.log: Value for SMK\_MAXERROR: 100 > temporal.point.nctox.20050710.log: Value for SMK\_MAXERROR: 100 > temporal.rateperdistance.nctox.20050710.us12-nc.log: Value for SMK\_MAXERROR: 900000 > temporal.rateperhour.nctox.20050710.us12-nc.log: Value for SMK\_MAXERROR: 900000 > [Iqbal@ADEQPlanning logs]$ cd SCRIPTS/install [Iqbal@ADEQPlanning install] ./check\_smk\_install > > Differences between your installation and correct answers exist! > Please refer to file $SMKROOT/doc/install\_diffs.txt for details. > > [Iqbal@ADEQPlanning install]$ cd $SMKROOT/doc > /home/Iqbal/Documents/SMOKE481/subsys/smoke/doc: No such file or directory. When I use following command: [root@ADEQPlanning smoke]# sudo find / -type f -name “install\_diffs.txt” I get the location of the file: /home/Iqbal/Documents/SMOKE481/subsys/smoke/scripts/install/install\_diffs.txt But I can not find out $SMKROOT/doc directory. Is it because my installation not complete?. Is it going to be an issue?