# Units SMOKE training material for RPD mobile sector **URL:** \ **Category:** SMOKE\ **Created:** [September 3, 2019, 8:33pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907 "2019-09-03T20:33:13Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 3, 2019, 8:33pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/1 "2019-09-03T20:33:13Z")
Hi all, I am running SMOKE for RPD mobile sector. I set the output units to moles/s as follow “setenv MRG\_GRDOUT\_UNIT moles/s # units for gridded output file”. I made sure MRG\_GRDOUT\_YN was set to Y. However, the output netcdf file has units of “tons/day”. Is there another setting that I need to change? ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [September 3, 2019, 9:12pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/2 "2019-09-03T21:12:24Z")
@FARAHES I think you did set the flags correctly for Movesmrg to output emissions in unit of moles/sec for all gases. Only thing I can think of the reason will be whether you merge the spcmat output file or not by setting “MRG\_SPCMAT\_YN” to Y. Make sure you set the following flags to output emissions in correct unit. setenv RPD\_MODE Y # Y process on-roadway emission factors setenv MRG\_GRDOUT\_YN Y # Y outputs gridded file setenv MRG\_TEMPORAL\_YN Y # Y merges with hourly emissions setenv MRG\_SPCMAT\_YN Y # Y merges with speciation matrix If this does not fix the issue, you could attach your Spcmat and Movesmrg log files to this post for me to review. ---
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 3, 2019, 10:36pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/3 "2019-09-03T22:36:59Z")
I made sure that all the flags were set correctly. Here are the settings for Movesmrg in my script: # For Movesmrg and Smkmerge setenv RPD\_MODE Y # Y process on-roadway (ratperdistance) emission factors setenv RPV\_MODE N # Y process off-network (ratepervehicle) emission factors setenv RPP\_MODE N # Y process off-network vapor venting (rateperprofile) EFs setenv RPH\_MODE N # Y process off-network extended idling (rateperhour) emission factors setenv MRG\_GRDOUT\_YN Y # Y outputs gridded file setenv MRG\_TEMPORAL\_YN Y # Y merges with hourly emissions setenv MRG\_SPCMAT\_YN Y # Y merges with speciation matrix setenv MRG\_REPCNY\_YN Y # Y produces a report of emission totals by county setenv MRG\_REPSTA\_YN Y # Y produces a report of emission totals by state setenv MRG\_REPSCC\_YN Y # Y produces a report of emission totals by SCC setenv MRG\_GRDOUT\_UNIT moles/s # units for gridded output file setenv MRG\_TOTOUT\_UNIT tons/day # units for state and/or county totals setenv MRG\_REPORT\_TIME 230000 # hour in OUTZONE for reporting emissions setenv TVARNAME TEMP2 # define name of temperature for the lookup tables setenv MOVESMRG\_CUSTOM\_OUTPUT Y # Y allows AOUT, BOUT, MOUT, and POUT Here is the Spcmat log file content: ``` This program uses the EPA-AREAL/MCNC-EnvPgms/BAMS Models-3 I/O Applications Programming Interface, [I/O API] which is built on top of the netCDF I/O library (Copyright 1993, 1996 University Corporation for Atmospheric Research/Unidata Program) and the PVM parallel-programming library (from Oak Ridge National Laboratory). Copyright (C) 1992-2002 MCNC, (C) 1992-2013 Carlie J. Coats, Jr., and (C) 2003-2012 Baron Advanced Meteorological Systems, LLC and released under the GNU LGPL License, version 2.1. See URL http://www.baronams.com/products/ioapi/LGPL.txt for conditions of use. $Id:: init3.F 29 2014-08-07 14:31:02Z coats $ Version with PARMS3.EXT/PARAMETER::MXVARS3= 2048 netCDF version 4.1.1 of Aug 7 2011 14:18:52 $ Missing environment variable EXECUTION_ID SMOKE --------------- Copyright (c)2004 Environmental Modeling for Policy Development All rights reserved Program SPCMAT, Version $ Online documentation http://www.cep.unc.edu/empd/products/smoke Program SPCMAT to take a SMOKE area, mobile, or point source inventory file, a speciation profiles file, a speciation cross-reference file, an optional pollutant-to-pollutant, conversion file, and produce mass-based and/or mole-based SMOKE speciation matrices for all inventory pollutants using run-time defined combinations of pollutants and model species. The output species are defined at run time by the speciation profiles file, permitting support of any chemical mechanism. You will need to enter the logical names for the input and output files (and to have set them prior to program start, using "setenv "). You may use END_OF-FILE (control-D) to quit the program during logical-name entry. Default responses are given in brackets [LIKE THIS] and can be accepted by hitting the key. Value for PROMPTFLAG: N returning FALSE Returning default value TRUE for query: "Continue with program?" Value for POLLUTANT_CONVERSION: N returning FALSE Value for SRC_TAGGING not defined;returning default: FALSE Value for SMK_SOURCE: 'M' Value for SMK_SOURCE: 'M' Value for PROMPTFLAG: N returning FALSE File "MOBL" opened for input on unit: 98 /CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.mobl.map.train_FE.txt Value for MOBL: '/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.mobl.map.train_FE.txt' Value for MOBL: '/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.mobl.map.train_FE.txt' ``` WARNING: output file already exists: MSRC /CAMData/SMOKE\_Farah/training/smoke//data/inventory/train\_FE/rateperdistancesrc.txt ``` File "MSRC" opened for output on unit: 97 /CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistancesrc.txt Value for IOAPI_CHECK_HEADERS not defined;returning default: FALSE "MOBL" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 10 vbles NetCDF ID: 6 opened as READONLY Time-independent data. "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/VMT.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 8037 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Time-independent data. Closing file TMP_POL_FILE "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/SPEED.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Time-independent data. Closing file TMP_POL_FILE File "GSREF" opened for input on unit: 96 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/gsref.mobile.txt File "GSPRO" opened for input on unit: 95 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/gspro.mobile.cmaq.cb05p25.txt File "INVTABLE" opened for input on unit: 94 /CAMData/SMOKE_Farah/training/smoke//data/inventory/romans06/other/invtable_MOVES2014_25sep2014_nf_v1.txt "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/VMT.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 8037 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 10 opened as READONLY Time-independent data. Closing file TMP_POL_FILE "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/SPEED.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 10 opened as READONLY Time-independent data. Closing file TMP_POL_FILE File "MEPROC" opened for input on unit: 93 /CAMData/SMOKE_Farah/training/smoke//data/inventory/romans06/rateperdistance/meproc.rateperdistance.txt Reading source data from inventory file... Generating unique lists from inventory data... Reading speciation cross-reference file... >>--->> WARNING in subroutine RDSREF Pollutant-specific entries in the speciation cross-reference file have been skipped. Processing speciation cross-reference file... Value for FULLSCC_ONLY: Y returning TRUE Scanning speciation profiles file for species... Value for SMK_SOURCE: 'M' Value for SMK_SOURCE: 'M' WARNING: No speciation profiles found for pollutant "N2O_INV" Pollutant ignored! WARNING: No speciation profiles found for pollutant "CO2_INV" Pollutant ignored! WARNING: No speciation profiles found for pollutant "CH4_INV" Pollutant ignored! WARNING: No speciation profiles found for pollutant "PM10" Pollutant ignored! WARNING: No speciation profiles found for pollutant "TIREPM10" Pollutant ignored! WARNING: No speciation profiles found for pollutant "BRAKEPM10" Pollutant ignored! WARNING: No speciation profiles found for pollutant "ACROLEI" Pollutant ignored! WARNING: No speciation profiles found for pollutant "BUTADIE" Pollutant ignored! WARNING: No speciation profiles found for pollutant "NAPHTH" Pollutant ignored! Value for PROMPTFLAG: N returning FALSE Number of variables per file array is not allocated for file set MSMAT_S; using default of 2048 variables per file Value for IOAPI_CHECK_HEADERS not defined;returning default: FALSE Value for IOAPI_OFFSET_64 not defined;returning default: FALSE "MSMAT_S" opened as UNKNOWN(R-W) File name "/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/static/msmat_s.cmaq.cb05p25.train_FE.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 74 vbles NetCDF ID: 11 opened as READWRITE Time-independent data. "MSMAT_L" opened as UNKNOWN(R-W) File name "/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/static/msmat_l.cmaq.cb05p25.train_FE.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 74 vbles NetCDF ID: 12 opened as READWRITE Time-independent data. ``` WARNING: output file already exists: MSSUP /CAMData/SMOKE\_Farah/training/smoke//data/run\_train\_FE/static/mssup.cmaq.cb05p25.train\_FE.txt ``` File "MSSUP" opened for output on unit: 92 /CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/static/mssup.cmaq.cb05p25.train_FE.txt Processing pollutant "CO_INV" Reading speciation profiles file... NOTE: "CO_INV" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... Value for IOAPI_LOG_WRITE not defined;returning default: TRUE SVAR001 written to MSMAT_S SVAR001 written to MSMAT_L Processing pollutant "NOX" Reading speciation profiles file... NOTE: "NOX" is split for all sources using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR002 written to MSMAT_S SVAR002 written to MSMAT_L SVAR003 written to MSMAT_S SVAR003 written to MSMAT_L SVAR004 written to MSMAT_S SVAR004 written to MSMAT_L Processing pollutant "NH3_INV" Reading speciation profiles file... NOTE: "NH3_INV" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR005 written to MSMAT_S SVAR005 written to MSMAT_L Processing pollutant "NO_INV" Reading speciation profiles file... NOTE: "NO_INV" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR006 written to MSMAT_S SVAR006 written to MSMAT_L Processing pollutant "NO2_INV" Reading speciation profiles file... NOTE: "NO2_INV" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR007 written to MSMAT_S SVAR007 written to MSMAT_L Processing pollutant "HONO_INV" Reading speciation profiles file... NOTE: "HONO_INV" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR008 written to MSMAT_S SVAR008 written to MSMAT_L Processing pollutant "NONHAPTOG" Reading speciation profiles file... NOTE: "NONHAPTOG" is split for all sources using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR009 written to MSMAT_S SVAR009 written to MSMAT_L SVAR010 written to MSMAT_S SVAR010 written to MSMAT_L SVAR011 written to MSMAT_S SVAR011 written to MSMAT_L SVAR012 written to MSMAT_S SVAR012 written to MSMAT_L SVAR013 written to MSMAT_S SVAR013 written to MSMAT_L SVAR014 written to MSMAT_S SVAR014 written to MSMAT_L SVAR015 written to MSMAT_S SVAR015 written to MSMAT_L SVAR016 written to MSMAT_S SVAR016 written to MSMAT_L SVAR017 written to MSMAT_S SVAR017 written to MSMAT_L SVAR018 written to MSMAT_S SVAR018 written to MSMAT_L SVAR019 written to MSMAT_S SVAR019 written to MSMAT_L SVAR020 written to MSMAT_S SVAR020 written to MSMAT_L SVAR021 written to MSMAT_S SVAR021 written to MSMAT_L SVAR022 written to MSMAT_S SVAR022 written to MSMAT_L SVAR023 written to MSMAT_S SVAR023 written to MSMAT_L SVAR024 written to MSMAT_S SVAR024 written to MSMAT_L SVAR025 written to MSMAT_S SVAR025 written to MSMAT_L Processing pollutant "PM2_5" Reading speciation profiles file... NOTE: "PM2_5" is split for all sources using profile " 92000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR026 written to MSMAT_S SVAR026 written to MSMAT_L SVAR027 written to MSMAT_S SVAR027 written to MSMAT_L SVAR028 written to MSMAT_S SVAR028 written to MSMAT_L SVAR029 written to MSMAT_S SVAR029 written to MSMAT_L SVAR030 written to MSMAT_S SVAR030 written to MSMAT_L Processing pollutant "BENZENE_INV" Reading speciation profiles file... NOTE: "BENZENE_INV" is split for all sources using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR031 written to MSMAT_S SVAR031 written to MSMAT_L SVAR032 written to MSMAT_S SVAR032 written to MSMAT_L SVAR033 written to MSMAT_S SVAR033 written to MSMAT_L Processing pollutant "FORMALD" Reading speciation profiles file... NOTE: "FORMALD" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR034 written to MSMAT_S SVAR034 written to MSMAT_L Processing pollutant "ACETALD" Reading speciation profiles file... NOTE: "ACETALD" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR035 written to MSMAT_S SVAR035 written to MSMAT_L Processing pollutant "PM25TIRE" Reading speciation profiles file... NOTE: "PM25TIRE" is split for all sources using profile " 92087" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR036 written to MSMAT_S SVAR036 written to MSMAT_L SVAR037 written to MSMAT_S SVAR037 written to MSMAT_L SVAR038 written to MSMAT_S SVAR038 written to MSMAT_L SVAR039 written to MSMAT_S SVAR039 written to MSMAT_L SVAR040 written to MSMAT_S SVAR040 written to MSMAT_L SVAR041 written to MSMAT_S SVAR041 written to MSMAT_L SVAR042 written to MSMAT_S SVAR042 written to MSMAT_L SVAR043 written to MSMAT_S SVAR043 written to MSMAT_L SVAR044 written to MSMAT_S SVAR044 written to MSMAT_L SVAR045 written to MSMAT_S SVAR045 written to MSMAT_L SVAR046 written to MSMAT_S SVAR046 written to MSMAT_L SVAR047 written to MSMAT_S SVAR047 written to MSMAT_L SVAR048 written to MSMAT_S SVAR048 written to MSMAT_L SVAR049 written to MSMAT_S SVAR049 written to MSMAT_L SVAR050 written to MSMAT_S SVAR050 written to MSMAT_L SVAR051 written to MSMAT_S SVAR051 written to MSMAT_L SVAR052 written to MSMAT_S SVAR052 written to MSMAT_L SVAR053 written to MSMAT_S SVAR053 written to MSMAT_L SVAR054 written to MSMAT_S SVAR054 written to MSMAT_L Processing pollutant "PM25BRAKE" Reading speciation profiles file... NOTE: "PM25BRAKE" is split for all sources using profile " 92009" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR055 written to MSMAT_S SVAR055 written to MSMAT_L SVAR056 written to MSMAT_S SVAR056 written to MSMAT_L SVAR057 written to MSMAT_S SVAR057 written to MSMAT_L SVAR058 written to MSMAT_S SVAR058 written to MSMAT_L SVAR059 written to MSMAT_S SVAR059 written to MSMAT_L SVAR060 written to MSMAT_S SVAR060 written to MSMAT_L SVAR061 written to MSMAT_S SVAR061 written to MSMAT_L SVAR062 written to MSMAT_S SVAR062 written to MSMAT_L SVAR063 written to MSMAT_S SVAR063 written to MSMAT_L SVAR064 written to MSMAT_S SVAR064 written to MSMAT_L SVAR065 written to MSMAT_S SVAR065 written to MSMAT_L SVAR066 written to MSMAT_S SVAR066 written to MSMAT_L SVAR067 written to MSMAT_S SVAR067 written to MSMAT_L SVAR068 written to MSMAT_S SVAR068 written to MSMAT_L SVAR069 written to MSMAT_S SVAR069 written to MSMAT_L SVAR070 written to MSMAT_S SVAR070 written to MSMAT_L SVAR071 written to MSMAT_S SVAR071 written to MSMAT_L SVAR072 written to MSMAT_S SVAR072 written to MSMAT_L SVAR073 written to MSMAT_S SVAR073 written to MSMAT_L Processing pollutant "SO2_INV" Reading speciation profiles file... NOTE: "SO2_INV" only has a unit conversion using profile " 0000" Writing MASS-BASED SPECIATION MATRIX... Writing MOLE-BASED SPECIATION MATRIX... SVAR074 written to MSMAT_S SVAR074 written to MSMAT_L Skipping pollutant "N2O_INV" Skipping pollutant "CO2_INV" Skipping pollutant "CH4_INV" Skipping pollutant "PM10" Skipping pollutant "TIREPM10" Skipping pollutant "BRAKEPM10" Skipping pollutant "ACROLEI" Skipping pollutant "BUTADIE" Skipping pollutant "NAPHTH" --->> Normal Completion of program SPCMAT ``` ---
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 3, 2019, 10:41pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/4 "2019-09-03T22:41:01Z")
Here is the content of Movesmrg log file ``` This program uses the EPA-AREAL/MCNC-EnvPgms/BAMS Models-3 I/O Applications Programming Interface, [I/O API] which is built on top of the netCDF I/O library (Copyright 1993, 1996 University Corporation for Atmospheric Research/Unidata Program) and the PVM parallel-programming library (from Oak Ridge National Laboratory). Copyright (C) 1992-2002 MCNC, (C) 1992-2013 Carlie J. Coats, Jr., and (C) 2003-2012 Baron Advanced Meteorological Systems, LLC and released under the GNU LGPL License, version 2.1. See URL http://www.baronams.com/products/ioapi/LGPL.txt for conditions of use. $Id:: init3.F 29 2014-08-07 14:31:02Z coats $ Version with PARMS3.EXT/PARAMETER::MXVARS3= 2048 netCDF version 4.1.1 of Aug 7 2011 14:18:52 $ Missing environment variable EXECUTION_ID SMOKE --------------- Copyright (c)2004 Environmental Modeling for Policy Development All rights reserved Program MOVESMRG, Version $ Online documentation http://www.cep.unc.edu/empd/products/smoke No program description is available for MOVESMRG You will need to enter the logical names for the input and output files (and to have set them prior to program start, using "setenv "). You may use END_OF-FILE (control-D) to quit the program during logical-name entry. Default responses are given in brackets [LIKE THIS] and can be accepted by hitting the key. Value for PROMPTFLAG: N returning FALSE Returning default value TRUE for query: "Continue with program?" Value for SMK_SOURCE: 'M' Value for SMK_SOURCE: 'M' Value for MRG_BYDAY not defined; returning defaultval ': ' ' Value for MRG_BYDAY not defined; returning defaultval ': ' ' Value for USE_SPCMAT_SPC_YN not defined;returning default: FALSE Value for MRG_METCHK_YN not defined;returning default: TRUE Value for MRG_GRDOUT_YN: Y returning TRUE Value for MRG_REPSTA_YN: Y returning TRUE Value for MRG_REPCNY_YN: Y returning TRUE Value for MRG_REPSCC_YN: Y returning TRUE Value for MRG_REPSRC_YN not defined;returning default: FALSE Value for TEMP_BUFFER_BIN not defined; returning default : 0 Value for MRG_GRDOUT_UNIT: 'moles/s' Value for MRG_GRDOUT_UNIT: 'moles/s' Value for MRG_TOTOUT_UNIT: 'tons/day' Value for MRG_TOTOUT_UNIT: 'tons/day' Value for USE_VARIABLE_GRID not defined;returning default: FALSE Value for SMK_SRCGROUP_OUTPUT_YN not defined;returning default: FALSE Value for RPD_MODE: Y returning TRUE Value for RPH_MODE: N returning FALSE Value for RPV_MODE: N returning FALSE Value for RPP_MODE: N returning FALSE Value for MEMORY_OPTIMIZE_YN not defined;returning default: FALSE Value for MTMP_OUTPUT_YN not defined;returning default: FALSE Value for USE_CONTROL_FACTORS not defined;returning default: FALSE Value for USE_HOURLY_SPEEDS not defined;returning default: FALSE Value for SMK_MVSPATH: '/CAMData/SMOKE_Farah/training/smoke//data/ge_dat/MOVES_lookuptables/' Value for SMK_MVSPATH: '/CAMData/SMOKE_Farah/training/smoke//data/ge_dat/MOVES_lookuptables/' Value for TVARNAME: 'TEMP2' Value for TVARNAME: 'TEMP2' Value for GRIDDESC: '/CAMData/SMOKE_Farah/training/smoke//data/ge_dat/GRIDDESC' Value for GRIDDESC: '/CAMData/SMOKE_Farah/training/smoke//data/ge_dat/GRIDDESC' File "GRIDDESC" opened for input on unit: 98 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/GRIDDESC WARNING: Line 1 in GRIDDESC file skipped because more than 32 fields were found. Value for IOAPI_GRIDNAME_1: 'ROMANS12_98X110' Value for IOAPI_GRIDNAME_1: 'ROMANS12_98X110' File "GRIDDESC" opened for input on unit: 98 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/GRIDDESC NOTE: Grid settings initialized using general in grid description file. Value for PROMPTFLAG: N returning FALSE File "MOBL" opened for input on unit: 98 /CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.mobl.map.train_FE.txt Value for MOBL: '/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.mobl.map.train_FE.txt' Value for MOBL: '/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.mobl.map.train_FE.txt' ``` WARNING: output file already exists: MSRC /CAMData/SMOKE\_Farah/training/smoke//data/inventory/train\_FE/rateperdistancesrc.txt ``` File "MSRC" opened for output on unit: 97 /CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistancesrc.txt Value for IOAPI_CHECK_HEADERS not defined;returning default: FALSE "MOBL" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 10 vbles NetCDF ID: 6 opened as READONLY Time-independent data. "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/VMT.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 8037 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Time-independent data. Closing file TMP_POL_FILE "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/SPEED.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Time-independent data. Closing file TMP_POL_FILE "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/VMT.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 8037 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Time-independent data. Closing file TMP_POL_FILE "TMP_POL_FILE" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/SPEED.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Time-independent data. Closing file TMP_POL_FILE Reading source data from inventory file... "IOAPI_DAT" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/inventory/train_FE/rateperdistance_dat/SPEED.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Time-independent data. Closing file IOAPI_DAT Generating unique lists from inventory data... Value for PROMPTFLAG: N returning FALSE "MTMP" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/scenario/mtmp.train_FE.2006188.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 2 vbles NetCDF ID: 7 opened as READONLY Starting date and time 2006188:000000 (0:00:00 July 7, 2006) Timestep 010000 (1:00:00 hh:mm:ss) Maximum current record number 25 NOTE: Time zone initialized using MTMP hourly emissions file. WARNING: Base year of MTMP file: 2011 , does not equal emissions year of MOBL file: -1 Value for PROMPTFLAG: N returning FALSE "MGMAT" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/static/mgmat.wus12.train_FE.ncf" File type SMATRX3 Execution ID "????????????????" Grid name "ROMANS12_98X110" Dimensions: 10780 rows, 515872 cols, 1 lays, 1 vbles NetCDF ID: 8 opened as READONLY Time-independent data. "MSMAT_L" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/static/msmat_l.cmaq.cb05p25.train_FE.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 74 vbles NetCDF ID: 9 opened as READONLY Time-independent data. "MSMAT_S" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/static/msmat_s.cmaq.cb05p25.train_FE.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "" Dimensions: 12032 rows, 1 cols, 1 lays, 74 vbles NetCDF ID: 10 opened as READONLY Time-independent data. "MET_CRO_2D" opened as OLD:READ-ONLY File name "/CAMData/SMOKE_Farah/training/smoke//data/met/run_romans_12k/METCRO2D_2006188" File type GRDDED3 Execution ID "mcip" Grid name "METCRO_BASE_19_C" Dimensions: 110 rows, 98 cols, 1 lays, 48 vbles NetCDF ID: 11 opened as READONLY Starting date and time 2006188:000000 (0:00:00 July 7, 2006) Timestep 010000 (1:00:00 hh:mm:ss) Maximum current record number 25 File "INVTABLE" opened for input on unit: 96 /CAMData/SMOKE_Farah/training/smoke//data/inventory/romans06/other/invtable_MOVES2014_25sep2014_nf_v1.txt File "COSTCY" opened for input on unit: 95 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/costcy.txt File "MEPROC" opened for input on unit: 94 /CAMData/SMOKE_Farah/training/smoke//data/inventory/romans06/rateperdistance/meproc.rateperdistance.txt File "MCXREF" opened for input on unit: 93 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/mcxref_moves.txt File "MFMREF" opened for input on unit: 92 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/mfmref_moves.txt File "MRCLIST" opened for input on unit: 91 /CAMData/SMOKE_Farah/training/smoke//data/ge_dat/MOVES_lookuptables/mrclist.rateperdistance.summed.lst Value for G_STDATE: 2006188 Value for G_STTIME: 0 Value for G_TSTEP: 10000 Value for G_RUNLEN: 250000 Value for PROMPTFLAG: N returning FALSE Using default value 2006188 for query: "Enter simulation starting date (YYYYDDD)|(YYYYMMDD)" Using date 2006188 Using default value 0 for query: "Enter simulation starting time (HHMMSS)" Using default value 25 for query: "Enter output duration (hours)" Output Time Zone: 00 Start Date: July 7, 2006 Start Time: 000000 HHMMSS Time Step: 001 hour Duration: 025 hours WARNING: Inventory base year -1 is inconsistent with year of episode start date 2006 NOTE: Output grid "ROMANS12_98X110" set; described as No description available NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. NOTE: Units conversion case not found for: "g" with "moles" No conversion will be made. Value for SMK_DEFAULT_TZONE: 5 Reading state and county names and time zones... NOTE: Population data read from country/state/county file for year 2000 Value for DAYLIGHT_EXEMPT not defined;returning default: FALSE Value for SMK_MAXWARNING: 100 Value for OUTPUT: '/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/output/merge/cmaq.cb05p25' Value for OUTPUT: '/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/output/merge/cmaq.cb05p25' Value for ESCEN: 'train_FE' Value for ESCEN: 'train_FE' Value for MOVESMRG_CUSTOM_OUTPUT: Y returning TRUE Value for MOUT: '/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/output/cmaq.cb05p25/mgts_l.rateperdistance.20060707.1.wus12.train_FE.ncf' Value for MOUT: '/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/output/cmaq.cb05p25/mgts_l.rateperdistance.20060707.1.wus12.train_FE.ncf' Number of variables per file array is not allocated for file set MOUT; using default of 2048 variables per file Value for IOAPI_CHECK_HEADERS not defined;returning default: FALSE "MOUT" opened as UNKNOWN(R-W) File name "/CAMData/SMOKE_Farah/training/smoke//data/run_train_FE/output/cmaq.cb05p25/mgts_l.rateperdistance.20060707.1.wus12.train_FE.ncf" File type GRDDED3 Execution ID "????????????????" Grid name "ROMANS12_98X110" Dimensions: 110 rows, 98 cols, 1 lays, 43 vbles NetCDF ID: 15 opened as READWRITE Starting date and time 2006188:000000 (0:00:00 July 7, 2006) Timestep 010000 (1:00:00 hh:mm:ss) Maximum current record number 25 Value for REPMG: '/CAMData/SMOKE_Farah/training/smoke//data/reports/train_FE/scenario/rep_l_rateperdistance_20060707_wus12_cmaq.cb05p25.txt' Value for REPMG: '/CAMData/SMOKE_Farah/training/smoke//data/reports/train_FE/scenario/rep_l_rateperdistance_20060707_wus12_cmaq.cb05p25.txt' ``` WARNING: output file already exists: REPMG /CAMData/SMOKE\_Farah/training/smoke//data/reports/train\_FE/scenario/rep\_l\_rateperdistance\_20060707\_wus12\_cmaq.cb05p25.txt ``` File "REPMG" opened for output on unit: 93 /CAMData/SMOKE_Farah/training/smoke//data/reports/train_FE/scenario/rep_l_rateperdistance_20060707_wus12_cmaq.cb05p25.txt Processing data for:"CO", "HONO", "NO", "NO2", "NH3", "SO2", "PEC", "PMFINE", "PNO3", "POC", "PSO4", "ALD2", "ALDX", "CH4", "ETH", "ETHA", "ETOH", "FORM", "IOLE", "ISOP", "MEOH", "NVOL", "OLE", "PAR", "TERP", "TOL", "UNR", "XYL", "BENZENE", "PAL", "PCA", "PCL", "PFE", "PH2O", "PK", "PMG", "PMN", "PMOTHR", "PNA", "PNCOM", "PNH4", "PSI", "PTI" Processing MOVES lookup tables for reference county 8035 of fuel month: 7 Reading emission factors file rateperdistance_smoke_aq_20141007_nei2011v2_20140924_8035_7.csv WARNING: Emission factors file does not contain requested model species NVOL Value for UNIFORM_STIME not defined; returning default: -1 Value for SMK_REPORT_TIME not defined; returning default: 230000 Value for IOAPI_LOG_WRITE not defined;returning default: TRUE CO written to MOUT for 2006188:000000 HONO written to MOUT for 2006188:000000 NO written to MOUT for 2006188:000000 NO2 written to MOUT for 2006188:000000 ... Closing file MOUT --->> Normal Completion of program MOVESMRG ``` ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [September 4, 2019, 1:56am UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/5 "2019-09-04T01:56:42Z")
Please set this flag “USE\_SPCMAT\_SPC\_YN” to Y. This will allow Movesmrg to merge Spcmat intermediate output files with other intermediate outfiles. ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [September 6, 2019, 12:47am UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/6 "2019-09-06T00:47:02Z")
Let me know whether this fixes your issue or not. ---
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 6, 2019, 3:53pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/7 "2019-09-06T15:53:04Z")
Did you mean to set "MRG\_SPCMAT\_SPC\_YN” to Y or "USE\_SPCMAT\_SPC\_YN” to Y ? I tried both of them and I did not get any change in the units. ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [September 6, 2019, 5:05pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/8 "2019-09-06T17:05:25Z")
Can you send the header lines from your MOUT netcdf output file “mgts\_l…”? Based on the filename and all the settings, the unit of gas species output should be moles/s. Not tons/day… Only summary report "REPMG file should have the emissions output in unit of tons/day. ---
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 6, 2019, 5:32pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/9 "2019-09-06T17:32:12Z")
This is the header lines using ncdump: dimensions: TSTEP = UNLIMITED ; // (25 currently) DATE-TIME = 2 ; LAY = 1 ; VAR = 43 ; ROW = 110 ; COL = 98 ; variables: int TFLAG(TSTEP, VAR, DATE-TIME) ; TFLAG:units = “\” ; TFLAG:long\_name = "TFLAG " ; TFLAG:var\_desc = "Timestep-valid flags: (1) YYYYDDD or (2) HHMMSS " ; float CO(TSTEP, LAY, ROW, COL) ; CO:long\_name = "CO " ; CO:units = "tons/day " ; CO:var\_desc = "Model species CO " ; float HONO(TSTEP, LAY, ROW, COL) ; HONO:long\_name = "HONO " ; HONO:units = "tons/day " ; HONO:var\_desc = "Model species HONO " ; float NO(TSTEP, LAY, ROW, COL) ; NO:long\_name = "NO " ; NO:units = "tons/day " ; NO:var\_desc = "Model species NO " ; float NO2(TSTEP, LAY, ROW, COL) ; NO2:long\_name = "NO2 " ; NO2:units = "tons/day " ; NO2:var\_desc = "Model species NO2 " ; float NH3(TSTEP, LAY, ROW, COL) ; NH3:long\_name = "NH3 " ; NH3:units = "tons/day " ; NH3:var\_desc = "Model species NH3 " ; float SO2(TSTEP, LAY, ROW, COL) ; SO2:long\_name = "SO2 " ; SO2:units = "tons/day " ; SO2:var\_desc = "Model species SO2 " ; float PEC(TSTEP, LAY, ROW, COL) ; PEC:long\_name = "PEC " ; PEC:units = "tons/day " ; PEC:var\_desc = "Model species PEC " ; float PMFINE(TSTEP, LAY, ROW, COL) ; PMFINE:long\_name = "PMFINE " ; PMFINE:units = "tons/day " ; PMFINE:var\_desc = "Model species PMFINE " ; float PNO3(TSTEP, LAY, ROW, COL) ; PNO3:long\_name = "PNO3 " ; PNO3:units = "tons/day " ; PNO3:var\_desc = "Model species PNO3 " ; float POC(TSTEP, LAY, ROW, COL) ; POC:long\_name = "POC " ; POC:units = "tons/day " ; POC:var\_desc = "Model species POC " ; float PSO4(TSTEP, LAY, ROW, COL) ; PSO4:long\_name = "PSO4 " ; PSO4:units = "tons/day " ; PSO4:var\_desc = "Model species PSO4 " ; float ALD2(TSTEP, LAY, ROW, COL) ; ALD2:long\_name = "ALD2 " ; ALD2:units = "tons/day " ; ALD2:var\_desc = "Model species ALD2 " ; float ALDX(TSTEP, LAY, ROW, COL) ; ALDX:long\_name = "ALDX " ; ALDX:units = "tons/day " ; ALDX:var\_desc = "Model species ALDX " ; float CH4(TSTEP, LAY, ROW, COL) ; CH4:long\_name = "CH4 " ; CH4:units = "tons/day " ; CH4:var\_desc = "Model species CH4 " ; float ETH(TSTEP, LAY, ROW, COL) ; ETH:long\_name = "ETH " ; ETH:units = "tons/day " ; ETH:var\_desc = "Model species ETH " ; float ETHA(TSTEP, LAY, ROW, COL) ; ETHA:long\_name = "ETHA " ; ETHA:units = "tons/day " ; ETHA:var\_desc = "Model species ETHA " ; float ETOH(TSTEP, LAY, ROW, COL) ; ETOH:long\_name = "ETOH " ; ETOH:units = "tons/day " ; ETOH:var\_desc = "Model species ETOH " ; float FORM(TSTEP, LAY, ROW, COL) ; FORM:long\_name = "FORM " ; FORM:units = "tons/day " ; FORM:var\_desc = "Model species FORM " ; float IOLE(TSTEP, LAY, ROW, COL) ; IOLE:long\_name = "IOLE " ; IOLE:units = "tons/day " ; IOLE:var\_desc = "Model species IOLE " ; float ISOP(TSTEP, LAY, ROW, COL) ; ISOP:long\_name = "ISOP " ; ISOP:units = "tons/day " ; ISOP:var\_desc = "Model species ISOP " ; float MEOH(TSTEP, LAY, ROW, COL) ; MEOH:long\_name = "MEOH " ; MEOH:units = "tons/day " ; MEOH:var\_desc = "Model species MEOH " ; float NVOL(TSTEP, LAY, ROW, COL) ; NVOL:long\_name = "NVOL " ; NVOL:units = "tons/day " ; NVOL:var\_desc = "Model species NVOL " ; float OLE(TSTEP, LAY, ROW, COL) ; OLE:long\_name = "OLE " ; OLE:units = "tons/day " ; OLE:var\_desc = "Model species OLE " ; float PAR(TSTEP, LAY, ROW, COL) ; PAR:long\_name = "PAR " ; PAR:units = "tons/day " ; PAR:var\_desc = "Model species PAR " ; float TERP(TSTEP, LAY, ROW, COL) ; TERP:long\_name = "TERP " ; TERP:units = "tons/day " ; TERP:var\_desc = "Model species TERP " ; float TOL(TSTEP, LAY, ROW, COL) ; TOL:long\_name = "TOL " ; TOL:units = "tons/day " ; TOL:var\_desc = "Model species TOL " ; float UNR(TSTEP, LAY, ROW, COL) ; UNR:long\_name = "UNR " ; UNR:units = "tons/day " ; UNR:var\_desc = "Model species UNR " ; float XYL(TSTEP, LAY, ROW, COL) ; XYL:long\_name = "XYL " ; XYL:units = "tons/day " ; XYL:var\_desc = "Model species XYL " ; float BENZENE(TSTEP, LAY, ROW, COL) ; BENZENE:long\_name = "BENZENE " ; BENZENE:units = "tons/day " ; BENZENE:var\_desc = "Model species BENZENE " ; float PAL(TSTEP, LAY, ROW, COL) ; PAL:long\_name = "PAL " ; PAL:units = "tons/day " ; PAL:var\_desc = "Model species PAL " ; float PCA(TSTEP, LAY, ROW, COL) ; PCA:long\_name = "PCA " ; PCA:units = "tons/day " ; PCA:var\_desc = "Model species PCA " ; float PCL(TSTEP, LAY, ROW, COL) ; PCL:long\_name = "PCL " ; PCL:units = "tons/day " ; PCL:var\_desc = "Model species PCL " ; float PFE(TSTEP, LAY, ROW, COL) ; PFE:long\_name = "PFE " ; PFE:units = "tons/day " ; PFE:var\_desc = "Model species PFE " ; float PH2O(TSTEP, LAY, ROW, COL) ; PH2O:long\_name = "PH2O " ; PH2O:units = "tons/day " ; PH2O:var\_desc = "Model species PH2O " ; float PK(TSTEP, LAY, ROW, COL) ; PK:long\_name = "PK " ; PK:units = "tons/day " ; PK:var\_desc = "Model species PK " ; float PMG(TSTEP, LAY, ROW, COL) ; PMG:long\_name = "PMG " ; PMG:units = "tons/day " ; PMG:var\_desc = "Model species PMG " ; float PMN(TSTEP, LAY, ROW, COL) ; PMN:long\_name = "PMN " ; PMN:units = "tons/day " ; PMN:var\_desc = "Model species PMN " ; float PMOTHR(TSTEP, LAY, ROW, COL) ; PMOTHR:long\_name = "PMOTHR " ; PMOTHR:units = "tons/day " ; PMOTHR:var\_desc = "Model species PMOTHR " ; float PNA(TSTEP, LAY, ROW, COL) ; PNA:long\_name = "PNA " ; PNA:units = "tons/day " ; PNA:var\_desc = "Model species PNA " ; float PNCOM(TSTEP, LAY, ROW, COL) ; PNCOM:long\_name = "PNCOM " ; PNCOM:units = "tons/day " ; PNCOM:var\_desc = "Model species PNCOM " ; float PNH4(TSTEP, LAY, ROW, COL) ; PNH4:long\_name = "PNH4 " ; PNH4:units = "tons/day " ; PNH4:var\_desc = "Model species PNH4 " ; float PSI(TSTEP, LAY, ROW, COL) ; PSI:long\_name = "PSI " ; PSI:units = "tons/day " ; PSI:var\_desc = "Model species PSI " ; float PTI(TSTEP, LAY, ROW, COL) ; PTI:long\_name = "PTI " ; PTI:units = "tons/day " ; PTI:var\_desc = "Model species PTI " ; // global attributes: :IOAPI\_VERSION = "Id:: init3.F 29 2014-08-07 14:31:02Z coats " ; :EXEC\_ID = "??? " ; :FTYPE = 1 ; :CDATE = 2019239 ; :CTIME = 205719 ; :WDATE = 2019239 ; :WTIME = 205719 ; :SDATE = 2006188 ; :STIME = 0 ; :TSTEP = 10000 ; :NTHIK = 1 ; :NCOLS = 98 ; :NROWS = 110 ; :NLAYS = 1 ; :NVARS = 43 ; :GDTYP = 2 ; :P\_ALP = 33. ; :P\_BET = 45. ; :P\_GAM = -97. ; :XCENT = -97. ; :YCENT = 40. ; :XORIG = -1416000. ; :YORIG = -696000. ; :XCELL = 12000. ; :YCELL = 12000. ; :VGTYP = -1 ; :VGTOP = 0.f ; :VGLVLS = 1.f, 0.995f ; :GDNAM = "ROMANS12\_98X110 " ; :UPNAM = "OPENSET " ; :VAR-LIST = "CO HONO NO NO2 NH3 SO2 PEC PMFINE PNO3 POC PSO4 ALD2 ALDX CH4 ETH ETHA ETOH FORM IOLE ISOP MEOH NVOL OLE PAR TERP TOL UNR XYL BENZENE PAL PCA PCL PFE PH2O PK PMG PMN PMOTHR PNA PNCOM PNH4 PSI PTI " ; :FILEDESC = "Mobile source emissions data /FROM/ OPENMRGOUT /VERSION/ $ /BASE YEAR/ -1 /NUMBER OF FILES/ 1 /FILE POSITION/ 1 /NUMBER OF VARIABLES/ 43 " ; :HISTORY = “” ; ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [September 6, 2019, 5:54pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/10 "2019-09-06T17:54:46Z")
Can you attach your Movesmrg and Spcmat log files as attachments? Not just copy and paste but as an attachment file so then I can see the full description of how both programs ran ---
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 6, 2019, 5:57pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/11 "2019-09-06T17:57:34Z")
Last time that I wanted to attach a file, it said the new users cannot attach files. That’s why I copied and pasted the file contents. I’ll try to attach the files again. ---
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 6, 2019, 6:06pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/12 "2019-09-06T18:06:58Z")
I got the same message: “Sorry, new users can not upload attachments”. Is there any way to resolve this? Thanks. ---
**Author:** ![FARAHES](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@FARAHES](https://forum.cmascenter.org/u/FARAHES)\ **Post date:** [September 10, 2019, 7:53pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/14 "2019-09-10T19:53:31Z")
As you suggested, I manually removed the M\_OUT file and ran the “rateperdistance” script again and it worked! Apparently, the header line did not get overwritten with correct unit information. Thank you! ---
**Author:** ![farzad-faghihi](https://avatars.discourse-cdn.com/v4/letter/f/e0b2c6/32.png) [@farzad-faghihi](https://forum.cmascenter.org/u/farzad-faghihi)\ **Post date:** [August 28, 2021, 3:27pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/15 "2021-08-28T15:27:55Z")
Hi, @FARAHES I have the same warning you shared. How could you solve this? ```auto WARNING: Inventory base year -1 is inconsistent with year of episode start date 2017 ``` although I have `#YEAR 2017` in header of my MOBL file. Thanks. @bbaek ---
**Author:** ![eyth.alison](https://avatars.discourse-cdn.com/v4/letter/e/7ab992/32.png) [@eyth.alison](https://forum.cmascenter.org/u/eyth.alison)\ **Post date:** [August 30, 2021, 12:52pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/16 "2021-08-30T12:52:31Z")
What MOBL files are you specifically referring to? ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [August 30, 2021, 1:30pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/17 "2021-08-30T13:30:35Z")
@farzad-faghihi The warning message you mentioned here is from Smkinven program due to the YEAR setting in your raw inventory (MBINV). When your modeling year is set to 2017 and no specific year is set for MBINV, Smkinven will give that warning and then use the modeling year 2017 for the Smkinven intermediate output file (MOBL) as a header information. It is a warning. ---
**Author:** ![farzad-faghihi](https://avatars.discourse-cdn.com/v4/letter/f/e0b2c6/32.png) [@farzad-faghihi](https://forum.cmascenter.org/u/farzad-faghihi)\ **Post date:** [September 1, 2021, 6:21am UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/18 "2021-09-01T06:21:53Z")
Thanks for your response. @bbaek @eyth.alison this is my mbinv file.[mbinv.VMT.nc.txt](https://forum.cmascenter.org/uploads/short-url/iAMGh3I61qKTGXx8JpddbbxYeiF.txt) (2.2 KB) [mbinv.SPEED.nc.txt](https://forum.cmascenter.org/uploads/short-url/u8SHmLtzzA5NDNaK7oEdNJ84it4.txt) (9.0 KB) [mbinv.VPOP.nc.txt](https://forum.cmascenter.org/uploads/short-url/nJl9YFgJKZMiCAWgDvEMlFFJsdn.txt) (2.0 KB)[ASSIGNS.isf.cmaq.txt](https://forum.cmascenter.org/uploads/short-url/qxHxqyNE5jctlsJfzWMT3YBUTlt.txt) (23.5 KB) ---
**Author:** ![farzad-faghihi](https://avatars.discourse-cdn.com/v4/letter/f/e0b2c6/32.png) [@farzad-faghihi](https://forum.cmascenter.org/u/farzad-faghihi)\ **Post date:** [September 4, 2021, 6:50am UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/19 "2021-09-04T06:50:22Z")
@eyth.alison @bbaek No one can help me ? I sent my inputs in the last reply. ---
**Author:** ![bbaek](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.cmascenter.org/bbaek/32/22_2.png) [@bbaek](https://forum.cmascenter.org/u/bbaek)\ **Post date:** [September 4, 2021, 12:38pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/20 "2021-09-04T12:38:39Z")
Thanks for sharing your activity inventory files. The formats look fine to me. I do need to see your Smkinven log file to understand what is going on in Smkivnen. ---
**Author:** ![farzad-faghihi](https://avatars.discourse-cdn.com/v4/letter/f/e0b2c6/32.png) [@farzad-faghihi](https://forum.cmascenter.org/u/farzad-faghihi)\ **Post date:** [September 4, 2021, 3:44pm UTC](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907/21 "2021-09-04T15:44:22Z")
Thanks a lot for your response. This is my Smkinven log file [smkinven.rateperdistance.nctoxISF.txt](https://forum.cmascenter.org/uploads/short-url/6WKJwKLsga3eh01JKiG8W2dT04X.txt) (20.1 KB) and this one is my rate-per-distance script, also you can check what setup I set for the run. [smk\_rateperdistance\_nctox.csh](https://forum.cmascenter.org/uploads/short-url/f0HwOkksMHWOg4jsY1HlZd9bfZJ.csh) (6.6 KB) Thanks. [Next page](https://forum.cmascenter.org/t/units-smoke-training-material-for-rpd-mobile-sector/907.md?page=2)