#!/bin/csh -f
#
# Version @(#)$Id$
# Path    $Source$
# Date    $Date$
#
# This script sets up needed environment variables for processing area source
# emissions in SMOKE and calls the scripts that run the SMOKE programs. 
#
# Script created by : B. Baek, Institute for the Environment in UNC at Chapel Hill 
#
#*********************************************************************

## Set Assigns file name🙂️
setenv ASSIGNS_FILE $SMKROOT/assigns/ASSIGNS.isf.cmaq

## Set source category
setenv SMK_SOURCE    M          # source category to process
setenv MRG_SOURCE    M          # source category to merge

## Set programs to run...

## Time-independent programs
setenv RUN_SMKINVEN  Y          # run inventory import program
setenv RUN_SPCMAT    Y          # run speciation matrix program
setenv RUN_GRDMAT    Y          # run gridding matrix program

## Time-dependent programs
setenv RUN_TEMPORAL  Y          # run temporal allocation program
setenv RUN_MOVESMRG  Y          # run merge program

## Program-specific controls...

## For Smkinven
setenv FILL_ANNUAL          N   # Y fills annual data with average-day data
setenv RAW_DUP_CHECK        Y   # Y checks for duplicate records
setenv SMK_BASEYR_OVERRIDE  0   # year to override the base year of the inventory
setenv SMK_NHAPEXCLUDE_YN   N   # Y uses NHAPEXCLUDE file when integrating toxic sources
setenv SMKINVEN_FORMULA     ""  # formula for computing emissions value
setenv WEST_HSPHERE         N   # Y converts longitudes to negative values🙂️
setenv WKDAY_NORMALIZE      N   # Y treats average-day emissions as weekday only
setenv WRITE_ANN_ZERO       N   # Y writes zero emission values to intermediate inventory
setenv ALLOW_NEGATIVE       N   # Y allow negative output emission data
setenv USE_REF_SCC_YN       Y   # Y disaggregate SCC8 activity to full SCC10
setenv EXCLUDE_REF_SCC_YN   Y   # Y drop SCCs not found in SCCXREF input file
#      INVNAME1         set by make_invdir.csh script
#      INVNAME2         set by make_invdir.csh scripts
#      OUTZONE          see "Multiple-program controls" below
#      SMK_MAXERROR     see "Multiple-program controls" below
#      SMK_MAXWARNING   see "Multiple-program controls" below
#      SMK_TMPDIR       set by assigns/set_dirs.scr script

## For Grdmat
setenv SMK_USE_FALLBACK     Y   # Y use fallback surrogate code
setenv SMK_DEFAULT_SRGID    110 # surrogate code number to use as fallback🙂️
#      IOAPI_ISPH       set by Assigns file
#      REPORT_DEFAULTS  see "Multiple-program controls" below

## For Spcmat
setenv POLLUTANT_CONVERSION N   # Y uses the GSCNV pollutant conversion file
#      REPORT_DEFAULTS  see "Multiple-program controls" below

## For Temporal
setenv SMK_EF_MODEL     MOVES  # processing MOVES model for mobile source emissions
setenv RENORM_TPROF         N  # Y renormalizes temporal profiles🙂️
setenv UNIFORM_TPROF_YN     N  # Y makes all temporal profiles uniform
setenv ZONE4WM              Y  # Y uses time zones for start of day & month#      OUTZONE          see "Multiple-program controls" below
#      REPORT_DEFAULTS  see "Multiple-program controls" below
#      SMK_AVEDAY_YN    see "Multiple-program controls" below
#      SMK_MAXERROR     see "Multiple-program controls" below
#      SMK_MAXWARNING   see "Multiple-program controls" below

# For Movesmrg
setenv RPD_MODE             Y          # Y process on-roadway emission factors
setenv RPV_MODE             N          # Y process off-network emission factors
setenv RPP_MODE             N          # Y process off-network vapor venting EFs
setenv MRG_GRDOUT_YN        Y          # Y outputs gridded file
setenv MRG_TEMPORAL_YN      Y          # Y merges with hourly emissions
setenv MRG_SPCMAT_YN        Y          # Y merges with speciation matrix
setenv MRG_REPCNY_YN        Y          # Y produces a report of emission totals by county
setenv MRG_REPSTA_YN        Y          # Y produces a report of emission totals by state
setenv MRG_REPSCC_YN        Y          # Y produces a report of emission totals by SCC
setenv MRG_GRDOUT_UNIT      moles/s    # units for gridded output file
setenv MRG_TOTOUT_UNIT      tons/day  # units for state and/or county totals
setenv MRG_REPORT_TIME      230000     # hour in OUTZONE for reporting emissions
setenv TVARNAME             TEMP2      # define name of temperature for the lookup tables

#added by farzad🙂️
setenv USE_CONTORL_FACTORS  N
setenv USE_EXP_GEO_CODES    N
setenv USE_HOURLY_SPEEDS    N
setenv SMK_SRCGROUP_OUTPUT_YN N
setenv SMK_AVEDAY_YN        N
setenv USE_AVG_SPD_DIST     Y
#setenv SMKINVEN_MONTH       0
setenv SMK_DEFAULT_TZONE    0


## Multiple-program controls
setenv OUTZONE              0     # output time zone of emissions
setenv REPORT_DEFAULTS      N     # Y reports default profile application
setenv SMK_DEFAULT_TZONE    0     # time zone to fix in missing COSTCY file🙂️
setenv SMK_AVEDAY_YN        N     # Y uses average day emissions instead of annual
setenv SMK_MAXWARNING       100   # maximum number of warnings in log file
setenv SMK_MAXERROR         900000   # maximum number of errors in log file
setenv USE_SPEED_PROFILES   N     # Y uses speed profiles instead of inventory speeds
setenv FULLSCC_ONLY         Y     # Y only matches profiles by full SCCs

## Script settings
setenv SRCABBR              rateperdistance  # abbreviation for naming log files
setenv QA_TYPE              all # type of QA to perform [none, all, part1, part2, or custom]
setenv PROMPTFLAG           N   # Y prompts for user input
setenv AUTO_DELETE          Y   # Y automatically deletes I/O API NetCDF output files
setenv AUTO_DELETE_LOG      Y   # Y automatically deletes log files
setenv DEBUGMODE            N   # Y runs program in debugger
setenv DEBUG_EXE            pgdbg # debugger to use when DEBUGMODE = Y

## Assigns file override settings
# setenv SPC_OVERRIDE  cmaq.cb4p25  # chemical mechanism override
# setenv YEAR_OVERRIDE              # base year override
# setenv INVTABLE_OVERRIDE          # inventory table override

##############################################################################

## Run Smkinven, Spcmat, and Grdmat
#
setenv RUN_PART1 Y
source $ASSIGNS_FILE   # Invoke Assigns file

source smk_run.csh     # Run programs
source qa_run.csh      # Run QA for part 1
setenv RUN_PART1 N

## Loop through days to run Temporal and Smkmerge
#
setenv RUN_PART2 Y
setenv RUN_PART4 Y
set cnt = 0
set g_stdate_sav = $G_STDATE
while ( $cnt < $EPI_NDAY )

   @ cnt = $cnt + $NDAYS
   source $ASSIGNS_FILE   # Invoke Assigns file to set new dates
   source smk_run.csh     # Run programs
   source qa_run.csh      # Run QA for part 2
   setenv G_STDATE_ADVANCE $cnt

end
setenv RUN_PART2 N
setenv RUN_PART4 N
unsetenv G_STDATE_ADVANCE

#
## Ending of script
#
exit( 0 )
