Error: 'compiler' should be set either in the
       environment or as input to config.cmaq
       Example:> ./config.cmaq [compiler]
       Options: intel | gcc | pgi
Tue Jun  2 13:21:16 MDT 2020
                                                                     
     This program uses the EPA-AREAL/MCNC-EnvPgms/BAMS Models-3      
     I/O Applications Programming Interface, [I/O API] which is      
     built on top of the netCDF I/O library (Copyright 1993, 1996    
     University Corporation for Atmospheric Research/Unidata         
     Program) and the PVM parallel-programming library (from         
     Oak Ridge National Laboratory).                                 
     Copyright (C) 1992-2002 MCNC,                                   
     (C) 1992-2018 Carlie J. Coats, Jr.,                             
     (C) 2003-2012 Baron Advanced Meteorological Systems, LLC, and   
     (C) 2014-2019 UNC Institute for the Environment.                
     Released under the GNU LGPL  License, version 2.1.  See URL     
                                                                     
         https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html     
                                                                     
     for conditions of use.                                          
                                                                     
     ioapi-3.2: $Id: init3.F90 136 2019-10-16 13:57:49Z coats $
     Version with PARMS3.EXT/PARAMETER::MXVARS3= 2048
     netCDF version 4.7.0 of Oct 30 2019 12:37:17 $
      
      
     EXECUTION_ID: mcip

 ==============================================================================

                  US EPA COMMUNITY MULTISCALE AIR QUALITY MODEL
                    METEOROLOGY-CHEMISTRY INTERFACE PROCESSOR

                           MCIP V5.1 FROZEN 11/21/2019

 ==============================================================================




 - SUBROUTINE SETUP_WRFEM - READING WRF HEADER
   WRF GRID DIMENSIONS (X,Y,Z)   80   80  32



 ------------------------------------------------------------------------------

                        USER OPTIONS AND GRID DEFINITIONS


 Output start date = 2017-03-15-13:00:00.0000
 Output end date   = 2017-05-05-06:00:00.0000
 Output interval   =  60 minutes


 LPV     =   1:  Will calculate and output 3D potential vorticity
 LWOUT   =   1:  Will output vertical velocity from the met model
 LUVBOUT =   1:  Will output u- and v-component winds on B grid
 IOFORM  =   1:  Will write output in Models-3 I/O API

 LAI was  found in the meteorology input file

 FRACTIONAL LAND USE was  found in the meteorology input file
 FRACTIONAL LAND USE will be read from the GEO file

 MONIN-OBUKHOV LENGTH was NOT found in the meteorology input file

 MONIN-OBUKHOV LENGTH will  be recomputed by MCIP (Only for WRF P-X LSM)

 AERODYNAMIC AND STOMATAL RESISTANCE was NOT found in the meteorology input file

 2-m TEMPERATURE was  found in the meteorology input file

 2-m MIXING RATIO was  found in the meteorology input file

 VEGETATION FRACTION was  found in the meteorology input file

 10-m WIND was  found in the meteorology input file

 CANOPY WETNESS was  found in the meteorology input file

 ROUGHNESS LENGTH was NOT found in the meteorology input file

 SOIL MOISTURE, TEMPERATURE, AND TYPE was  found in the meteorology input file

 SOIL MOISTURE, TEMPERATURE, AND TYPE will  be in the output file

 TURBULENT KINETIC ENERGY was NOT found in the meteorology input file

 URBAN CANOPY MODEL (WRF ONLY) was  used in the meteorology model

 3D RESOLVED CLOUD FRACTION was  found in the meteorology input file

 ADDITIONAL PX SURFACE VARIABLES will NOT be in the output file

 ADDITIONAL KF-RAD 3D VARIABLES will NOT be in the output file

 HYBRID VERTICAL COORDINATE was  used in the meteorology model


 Met    domain dimensions (col, row, lay):   80   80   32
 MCIP X domain dimensions (col, row, lay):   79   79   32
 Output domain dimensions (col, row, lay):   77   77   32


 Output grid resolution:    10.000000000000000       km
 Window domain origin on met domain (col,row):                1 ,            1
 Window domain far corner on met domain (col,row):           80 ,           80


 Cells and points for diagnostic prints
    LPRT_COL  LPRT_ROW      39    39
    LPRT_XCOL LPRT_XROW     40    40
    LPRT_METX LPRT_METY     40    40


 IOAPI header variables:
    GDTYP3D               2
    GDNAM3D  April_PXLSM     
    P_ALP3D          30.000
    P_BET3D          60.000
    P_GAM3D         -98.000
    XCENT3D         -98.000
    YCENT3D          41.000
    XORIG3D    -1437000.000
    YORIG3D     -299500.000
    XCELL3D       10000.000
    YCELL3D       10000.000
    VGTYP3D           -9999
    VGTOP3D        5000.000

    VGLVS3D   1.00000  0.99381  0.98595  0.97601  0.96356  0.94809
              0.92912  0.90619  0.87894  0.84721  0.81108  0.77095
              0.72753  0.68176  0.63450  0.58603  0.53665  0.48673
              0.43669  0.38699  0.33813  0.29063  0.24502  0.20182
              0.16151  0.12705  0.09814  0.07389  0.05353  0.03645
              0.02212  0.01009  0.00000

 ------------------------------------------------------------------------------



 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 ~~~ Processing meteorology for time = 2017-03-15-13:00:00.0000
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


 **********************************************************************
 *** SUBROUTINE: RDWRFEM
 ***   LOOKING FOR INPUT MET AT TIME 2017-03-15-12:00:00.0000
 ***   INPUT FILE NUMBER   3 IS BLANK
 **********************************************************************
     
     *** ERROR ABORT in subroutine RDWRFEM
     ABNORMAL TERMINATION IN RDWRFEM
     Date and time  13:00:00  March 15, 2017  (2017074:130000)
     
Error running mcip