Hi BH and Alison (@bbaek @eyth.alison) et al.,
I have two questions using NEI2016 v1 package downloaded from EPA:
- Onroad_mex_part2_combine
here is the error:
Value for PROMPTFLAG not defined;returning default: TRUE
Enter logical name for INPUT FILE [INFILE] >> INFILE :/storage/highspeed/JH/EMP_2016/newftp.epa.gov/air/emismod/2016/v1/2016emissions/2016fh_16j/premerged/onroad_mex/emis_mole_onroad_mex_20161211_12US2_cmaq_cb6_2016fh_16j.ncf
>>--->> WARNING in subroutine OPEN3
File not available.
detail in:
I noticed in run script
set indir = $PROJECT_ROOT/$CASE/premerged/${SECTOR}_cb6orig
set outdir = $PROJECT_ROOT/$CASE/premerged/${SECTOR}
setenv INFILE1 $indir/emis_mole_${SECTOR}_cb6orig_${BASE_YEAR}${da}_${GRID}_${SPC}_${CASE}.ncf
setenv OUTFILE $outdir/emis_mole_${SECTOR}_${BASE_YEAR}${da}_${GRID}_${SPC}_${CASE}.ncf
setenv INFILE $OUTFILE
setenv OUTFILE $INFILE.xt
$IOAPIDIR/m3xtract << eof
250000
eof
mv -f $OUTFILE $INFILE
just wonder should this be corrected as
setenv INFILE $INFILE1
setenv OUTFILE $INFILE.xt
- SMOKE merge
I have all premerge files ready expect onroad_mex, and then ran merge
the error is:
NOTE: Grid settings initialized using FILE001 in
gridded file.
ERROR: Number of time steps 0 in file
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
is insufficient to cover the requested number of output
time steps 25
ERROR: Number of time steps 0 in file
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
is insufficient to cover the requested number of output
time steps 25
ERROR: Number of time steps 0 in file
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
is insufficient to cover the requested number of output
time steps 25
*** ERROR ABORT in subroutine SETOUTDATE
Problem with duration of input files
detail in:
not sure what the error is. should I try smoke4.6?
Any suggestion is helpful.
Best,
Joey